System Error Messages
Message | Action |
Memory error at:
MMMM:SSSS:OOO
(W:XXXX,R:YYYY)
where M is MB, S is Segment, O is Offset, X/Y is write/read pattern
Memory Size Mismatch
CPU Clock Mismatch
Check SIMMs on the system board. Contact your dealer.
Run Setup. Check if the values shown in the memory parameters are correct. If correct, exit Setup and reboot the system. If the error message reappears, seek technical assistance.
Onboard serial port 1 conflict
Onboard serial port 2 conflict
Onboard parallel port conflict
Pointing device error
Pointing device interface error
Press F1 key to continue or
Real time clock error
Run Setup and disable the port.
Run Setup and disable the port.
Run Setup and disable the port.
Check and connect pointing device.
Replace the pointing device or contact your dealer.
Press F1 or Ctrl + Alt + Esc to enter Setup.
Check the RTC chip. If it is still good, run Setup. If not, replace the RTC chip.
NCR S26 Hot Plug Server User Guide |
