Using the EISA Configuration Utility

8.To print the information, select Print by pressing F7. The “Print settings” screen displays.

If you have a printer attached to your computer, select “Print all configuration settings” or “Print settings for selected board or option,” and press Enter to print a hard copy of the switch and jumper settings and other configuration information.

If you do not have a printer, select “Print all configuration settings to a file” or “Print settings for selected board or option to a file.” A “Print information to TXT file” screen displays.

If you want to print the switch and jumper settings to a different diskette, insert a diskette in drive A and press Enter. Another “Print Information to TXT File” screen displays. Enter the name of your file or choose an existing filename and press Enter.

Note: If you inserted a different diskette, remember to reinsert the System Configuration diskette after printing is complete.

9.Press F10 when you are through. The “Steps in configuring your computer” screen displays.

5-12

Using the System Utilities

Page 102
Image 102
NCR S26 manual Using the Eisa Configuration Utility