![](/images/new-backgrounds/1187852/18785259x1.webp)
Configuring the System Board
Figure 2-8. System Board Jumper Locations
JP1 | JP2 | |
CN3 |
| |
SW1 |
| |
CN1 |
| |
CN8 | CN11 | |
CN5 | ||
JP3 | ||
CN2 | ||
CN12 | ||
CN7 | ||
| ||
CN6 | JP4 |
JP5
CN14
CN15
CN16
JP6
CN13
Jumper Settings
You have to change the jumper settings on the system board when you upgrade the CPU or reconfigure the system.
To change a jumper setting, follow these steps:
1.Remove the jumper cap from the jumper.
2.Position the jumper cap over the two pins for the desired setting.
3.Gently press the cap over the pins.
Using System Features |