Entering Setup
Entering Setup
CAUTION: Close all open files and leave your application program before entering Setup. You cannot exit back into an application. The system automatically reboots when you leave Setup.
Press the key combination Ctrl + Alt + Esc during the
test (POST) to enter Setup. The BIOS Utility (Setup) main menu, as shown in in the figure below appears.
Note: You can only enter Setup during POST. After POST, pressing Ctrl + Alt + Esc has no effect.
Figure 4-1. BIOS Utility (Setup) Main Menu
BIOS Utility
Basic System Configuration
Advanced System Configuration
PCI System Configuration
Power Saving Configuration
System Security
Remote Diagnostic Configuration
Load Setup Default Settings
= Move Highlight Bar,
= Select, Esc = Exit and Reboot
NCR S26 Hot Plug Server User Guide |
