NCR S26 manual Date and Time

Basic System Configuration

The figure below shows page 2 of the Basic System Configuration menu.

Figure 4-3. Basic System Configuration Menu, Page 2

Basic System Configuration Page 2/2

Communication Settings

Baud Rate . . . . . . . . . . . . . . . . . [ 9600 ] BPS

Parity . . . . . . . . . . . . . . . . . . . . . [ None ]

Stop Bits . . . . . . . . . . . . . . . . . . [ 1 ] Bits

Data Lengths . . . . . . . . . . . . . . [ 8 ] Bits

Enhanced IDE Features

Hard Disk Block M ode . . . . . . . [ Disabled ]

Hard Disk Size > 504MB . . . . . [ Disabled ]

On Board IDE . . . . . . . . . . . . . . . . . . . [ Disabled ]

Large M em ory Support Mode . . . . . . . [ Advanced ]

Num Lock After Boot . . . . . . . . . . . . . [ Enabled ]

Memory Test . . . . . . . . . . . . . . . . . . . . [ Enabled ]

Auto Configuration Mode . . . . . . . . . . [ Disabled ]

Fast Boot Mode . . . . . . . . . . . . . . . . . [ Disabled ]

	= M ove Highlight Bar,		= Change setting,
PgDn/PgUp = Move Screen,		F1 = Help,		Esc = Exit

The following sections explain the different parameters and their settings.

Date and Time

The real-time clock keeps the system date and time. After setting the date and time, you need not enter them every time you turn on the system. As long as the internal battery remains good (approximately seven years) and connected, the clock continues to keep the date and time accurately even when the power is off.

NCR S26 Hot Plug Server User Guide 4-5