Pantech C150 manual PIN1 Check, Change PIN1, Phone Lock, Change Password, Phone Barring

Settings

PIN1 Check

Press the [Left] or [Right] scroll key and [o] key for setup.

If you input the incorrect PIN1 code three consecutive times, you will be prompted to input the PUK1 number. The default is Disabled.

•Enabled: Input PIN1 whenever the power is turned on.

•Disabled: Do not input PIN1 whenever the power is turned on.

Change PIN1

Change the PIN1 number.

You can change the PIN1 number only when the phone is set for PIN1 Enable.

Phone Lock

This function allows you to lock your phone until the correct password is input.

Press the [o] key after you type the password.

Change Password

This function allows you to change your phone’s password. The default password is 1234.

Phone Barring

This function offers multiple methods to limit incoming or outgoing calls. In general, the barring service becomes activated by interoperating with the network, but phone barring is made by the phone itself. Major functions are as follows.

•Incoming: Limits all incoming calls.

•On: Set up all incoming calls barring.

•Off: Cancel all incoming calls barring.

•Outgoing: Limit all outgoing calls. When you attempt to make a call that has the prefixed number that you previously registered, the call is barred.

•Bar All: Set up all outgoing calls barring.

•Bar Prefixed: Add and delete the prefixed number. (Prefix also means your 10 or 11 digit number of your choosing)

•Off: Cancel all outgoing calls barring including the bar prefixed.

Fixed Dialing (Fixed Dialing Numbers)

Fixed Dialing is a service that limits your access to specific numbers in the Address Book list recorded on the SIM. Input the PIN2 to set up or cancel this service. (PIN 2 must be correctly entered within 3 tries.)

•On: Set up Fixed Dialing service.

86