Pantel PAN650, PAN420 Inputs/Outputs, Infrared Ray Remote Controller, In/Out Connector, Others

Infrared Ray Remote

Controller

Signal carrier frequency	38KHz
In/Out Connector
Video Input	RCA pin (Composite), S connector
Video Output（Through	RCA pin (Composite), S connector
output）
Audio Input	RCA pin L/R
Audio Output（Through	RCA pin L/R
Output）
IR Cable	Mini Jack
Others
Size	Width 220mm , Depth 150mm, Height 45mm
Weight	390g (only main body)
Power supply（AC adaptor）	AC in ：100-240V 50/60Hz 1.0A
	DC out： 12V(±5%) 2.5A
Power consumption	Max approx. 6.5W
Operation environment	Temperature 0-35￿ Humidity 20-80% (No Dew)
Approved Standard	TELEC, FCC part15, CE

Chapter 4 Inputs/Outputs

VIDEO INPUT:

1.STV-1100TX supports the following video inputs:

„Composite video input

„S-Video input

(1)User may choose either input type, usually determined by the connection available from the input video source device.

(2)The video input is selected by automatic detection of a video signal at one of the inputs. If the two inputs become active simultaneously, the order of precedence is: S-Video, Composite Video.

2.The video standard accepted by the VW-5TX is set by automatic detection of the video standard (NTSC).

3.Video standard supports the following video inputs: NTSC-M, NTSC-Japan, PAL[BGHI], SECAM.

4.This product supports the following VBI signals:

„NTSC WSS (also known as CGMS or WSS525).

„Macrovision (NTSC ONLY)

The VBI signals are accepted at the video inputs and transferred to the video outputs.

5.The system support NTSC closed caption signals. The CC signals are accepted at the video inputs and transferred to the video outputs.

6.The system is capable of accepting and outputting black and white signal (no

27/30