ParaBody 093 manual BODYSMITi-I Prosystem Assembly Instructions

093 BODYSMITi-I PROSYSTEM ASSEMBLY INSTRUCTIONS

Attach one (I) 1-1/4 SQ. RUBBERBUMPERto the CENTERof the CARRIAGESTOPon the

WEIGHT CARRIAGE.

o

Slide WEIGHTCARRIAGEdown over the REARUPRIGHTof the MAINUPRIC-;HT. (NOTE:

MAKESURE THAT THE WEIGHTPEG ON THE WEIGHTCAP,.RIAGE IS FACING TOWARDSTFIE FRONT OF THE MACHINE)

LOOSELYattach the two (2) PULLEYMOUNTFLATSto the REARand FROthTUPRIGHTSof the MAINUPRIGHT,using two (2) 3//I X 3 IN. BOLTS,two (2) 3/8 .IN. LOCKWASHERS,and two

IN. NUTS. (NOTE: THE HOLECLOSESTTO THE END ON THE PULLEYMOUNTFLATS SHOULDBE ASSEMBLEDTO THE REAR UPRIGHT) (SEE DRAWING)

AT THIS TIME TIGHTEN ALL LOOSEFRAMECONNECTIONSMADETO THIS POI_N~.

I1.

-12.

LOOSELYattach two (2) 3-1/20.D. X 1 IN. BUSHINGPULLEYand four (4) ID_ IN. LG. PULLEY SPACERS(ONE ON EACHSIDE OF THE PULLEYS)ber, veen the PULLEYMOUNTFLATS above the WEIGHT-CARRIAGE,using two (2) 3/8 X 3 IN BOLTS,two (2) 3/g IN. LOCKWASI-~RS, and two (2) 3/8 IN. NUTS.

Slide the two (2) RODENDCOVERSover the ends of the LATBARHOLDER.

Slide the LATBARHOLDERover the PULLEYMOUNTFLATS,and LOOSELYassemble in place, using one (1) 3/8 X 3-1/4 BOLT,and one (I) 3/g IN. HEIGHT LOCKNUT.(NOTE: USE ~

SECONDSET OF HOLESIN FROMTHE END) (SEE DRAWING)

13.LOOSELYassemble one (1) 3-1/20.D. X 1 IN. BUSHINGPULLEY,and two (2) lg.~ IN. LG. PULLEY SPACER(ONEON EACHSIDE .OF THEPULLEY)between the PULLEYMOUNTFLATSat the FRONT,using one (I) 3/8 X 3-I/4 IN. BOLTS,one (1) 3/8 IN. LOCKWASHER,and one (1) 318

NUT.

14.LOOSELYresemble one (I) 4-I/20.D. X 1 IN. BUSHINGPULLEYto the PULLEYBRACKETon the UPRIGHTBRACEoft.he MAINUPRIGHT,using one (1) .3/8 X 1-3/4 IN. BOLT,one (1) 3/g LOCKWASHER,and one (1) 3/8 IN. NUT.

15.LOOSELYassemble one (1) 3-1/'20.D. X I IN. BUSHINGPULLEYto the LOWROWPULLEY HOUSINGof the MAINUPRIGHT,using one (1) 3/8 X !-3/4 IN. BOLT,one(1) 3/g IN. WASHER,and one (1) 3/8 IN. NUT.

16.To assemble the PULLEYBLOCKSYSTEM,SECURELYassemble two (2) PAINTED CONNECTORSaround two (2) 3-1/20.D. X 1 IN. BUSHINGPULLEYS,using two> (2) 3/11 X2 BOLTS,four (4) 3/~I IN. WASHERS,and two (2) 3/8 IN. LOWHEIGHTLOCKNLU2S(NOTE:.

HOLES IN THE PAINTED CONNECTORARE OVAL, MAKESUITE THAT THE PULLEYSAP~ AT THEIVlJ~J~IMUMWIDTH,SEE DETAILG)