FIGURE 8 |
REMOVE CABLE |
STEP 8
Remove the existing LAT CABLE using the following steps:
•Disconnect LAT BAR from TOP BOOM.
•Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY.
•Route the LAT CABLE around the PULLEY BLOCK as shown in FIGURE 8.
•Route the LAT CABLE around the TOP BOOM as shown in FIGURE 8.
•The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
| |||||||||||
0 |
|
| 1 |
|
| 2 |
|
| 3 |
|
| 4 |
|
| 5 |
| 6 | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6
