FIGURE 15
~) STEP15
¯Screwoneofthethreadedendsofthepreviously HEAD PLATE
removedHEADPLATECABLEapproximatelyI" CABLE
intotheendof theWEIGHTSTACKSHAFT.See | (67250) |
| |
FIGURE15. |
|
STEP 16
¯Route the thread end of HEADPLATECABLEup and overthe PULLEYSin the TOP BOOMabove theWEIGHTSTACK.(Removepulleysforcase ofinstallation.)
¯Screwtheotherthreadedendof theHEADPLATE CABLEapproximatelyI"intotheendoftheshaft on
¯SECURELYtighten the pulleys connection from the previous step.
¯Atljust out any slack in the two cable systems. (Refer to your 425103iuslructious for the proper procedures.)
FIGURE 16
!
(67250)
12
