ParaBody 445103 manual Base

X 1-114"

BASE

FIGURE 13

;TEP 13

¯Insert four CAPPLUGS(9) into the top and bottom ends of the GUIDERODS(1) as shown in FIGURE13.

¯SECURELYassemble the WEIGHTSTACKSHAFT(2) to the I-[EAD PLATE(4) using one 3/8 X 1-1/4" BOLT(14) and one WASHER(10).

¯Insert two GUIDERODS(1) into the BASEas shown on FIGURE13. (NOTE: Lubricate GUIDERODS(1) with silicon teflon spray available at most hardware stores.)

o Slide two 1-1/4 SQ. X 4-7/8" TUBES(3), two 3/4" WASHERS(15), and two WEIGHTSTACKCUSHIONS(8) - IN ORDER- down over the GUIDERODS(1).

¯Using EXTREMECAREslide all fifteen WEIGHTPLATES(16) down over the GUIDERODS(1) on to the WEIGHTSTACK CUSHIONS(8). Makesure that the keyholes of the WEIGHTPLATES(16) are all facing the right

. Slide the head plate assembly downover the GUIDERODS(1) onto the weight stack.

¯Attach the WEIGHTSTACKLABELS(18) to the weight stack. Also insert the WEIGHTSTACKPIN (7) into the fast WEIGHT PLATE(16) of the weight stack.

10