Source Technologies 1352 MICR 40 Error Message, on Display, Printed Message, Description, Action

Error Message
on Display	Printed Message	Description	Action
Can’t Purge Pswd not		This error indicates that MICR mode has not	Press Go. Enter MICR mode, then
enabled		been enabled.	re-attempt the purge.
Can’t Sort Insufficient		This error indicates the printer does not	Press Go. The printer may need
Memory		have sufficient memory to sort the Audit	to be upgraded with more RAM
		Report.	memory to sort; otherwise an
			unsorted Audit Report may be
			printed.
Command Decode Error	Decode error &%Sx	A syntax error was detected in a MICR	Check your software for a
	(where x is the	command.	syntax error in the MICR
	incorrect character)		command that was being used
			when the error occurred.
Convert to Esc Error	Invalid Convert to	An error was detected in the User	Check the Command (&%STY...)
	Escape Character	Programmable Escape Character Selection	for errors.
		Command. The software tried to specify a
		NULL or an ampersand as the first Escape
		Character.
Flash Full Purge and		This error message indicates that the	Press Go then purge the audit
Format		printer’s flash memory is full. The audit trail	trail. Then either defragment or
		cannot accept more jobs until more space	format flash memory (Utilities
		is available in flash.	Menu).
Load MICR Toner		Before printing a MICR font, the printer	Replace standard toner cartridge
		checks for MICR toner. If regular toner is	with a MICR Toner. Go to
		present, the printer will stop all printing and	proceed. If MICR toner is not
		display this message.	available, you must power-off
			your printer and restart the print
			job at a later time when MICR
			toner is available.
Macro Definition Error	Invalid decode mode	The Load Flash Resource Command	Check the Command (&%STL...)
	specified	contained an invalid character specifying	for syntax errors.
		the format of the file. Must be either a D or
		S.
Macro Definition Error	Macro ID already in	The resource number in the Load Flash	Check the Load Flash Resource
	use on SIMM. Print	Resource Command (&%STL...) was over	Command for syntax/numbering
	menus to see a list	the 32767 list.	errors.
	of used ID’s.
Macro Definition Error	Macro size exceeds	Flash resource file size specified in the	Format flash memory to remove
	available space	Load Flash Resource Command is too large	all existing resources or upgrade
		fro the available space remaining in the	flash memory to a larger module.
		flash module.
Macro Definition Error	Non-hexadecimal	The Load Flash Resource Command	Check the Command (&%STL...)
	value received.	contained a non-hexadecimal value in the	syntax for errors.
		byte count parameter.
Macro Definition Error	Non integer value	The resource number in the Load Flash	Check the command for syntax/
	received.	Resource Command (&%STL...) was not	numbering errors.
		five integers.
Macro Transfer Error	Integer string	The Flash Resource Number in the Secure	Check the Command (&%STP...)
	incorrect length	Flash Resource Unlock Command was not	for syntax/numbering errors.
		five digits in length.
Macro Transfer Error	Non-integer value	The Secure Flash Resource Unlock	Check the Command (&%STP...)
	received.	Command contained a non-integer value.	for syntax/numbering errors.
MICR Definition Error		The number of digits in the MICR definition	Check your software for errors in
		Command is not equal to four, or there is a	the MICR definition Command.
		non-hexadecimal character in the count.
MICR Password Error	Password Length	Password length is not equal to eight	Check the Password Command in
	Error.	characters.	your software, it must be eight
			characters long.
MICR Password Error	Password Match	Password sent does not match the current	Check the Password Command in
	Error	stored password.	your software.
MICR Password Error	Security Lock Not	Front panel combination feature has been	From the front panel select MICR
	Enabled Error.	enabled but was not entered before a MICR	Menu>Security Lock and enter
		job was started.	the correct combination. Press
			Go to resume the print job.
Security Lock Error	Integer string	An error was detected in the Activate/Set	Check the Activate/Set Front
	incorrect length.	Front Panel Combination Lock Command.	Panel Combination Lock Command
		The combination must be eight digits in	in your software.
		length.
Security Lock Error	Non-integer value	An error was detected in the Activate/Set	Check the Activate/Set Front
	received.	Front Panel Combination Lock Command. A	Panel Combination Lock Command
		character was received in the command	syntax in your software.
		that was a non-integer.

Secure MICR Printer User’s Guide July 2003

Page 46	© Source Technologies
	All rights reserved