Source Technologies 1352 MICR 40 manual Print and Purge Audit Report &%SPURGExx$, SPRINTxx$

Section 8: Audit Trail Reports

Print and Purge Audit Report &%SPURGExx$

&%SPURGE	Lead in string
x	option(s)
$	Command terminator

This command prints and purges the Audit Report. All recorded information is deleted. The optional field can be any combination of the following letters:

T Total Field 4

O Overlay

S Sort by MICR line

CCommunicate - send report to host instead of printing - see additional information below on SPRINT command

For example, the command &%SPURGES$ sorts the records by the MICR line while the command &%SPURGESO$ sorts the records by the MICR line and prints an overlay with the data.

Options can be forced on with these commands but they cannot be forced off. In other words, if the front panel overlay setting is on, it cannot be forced off by a datastream command. If the front panel overlay setting is off, however, a datastream command can activate this feature. This command can only be accessed with a valid password command.

Print Audit Report	&%SPRINTxx$
&%SPRINT	Lead in string
x	option(s)
$	Command terminator
Prints the Audit Report

The optional field can be any combination of the following letters:

T	Total Field 4
O	Overlay
S	Sort by MICR line
U	Unsuccessful report only
C	Communicate - send report to host instead of printing

The report sent back to the host begins with SOH (0x01) and ends with EOT (04). Since the reports can be quite long, they will likely be broken into separate buffers which may be interspersed with non-audit buffers such as PJL JOB status. Each buffer will begin with an STX character (0x02) and end with ETX (0x03).

Each record will be terminated with carriage return-line feed (0x0D 0A).

Secure MICR Printer User’s Guide July 2003

Page 38	© Source Technologies
	All rights reserved