FIGURE 13
!IMPORTANT! SECURELY TIGHTEN JAMNUT
;TEP13:
¯Screwthe threaded end of the CABLE(7) approximately 3/4" into the end of the 20 HOLESELECTORSHAFT(5) and tighten nut securely. See FIGURE13.
¯Insert the WEIGHTSTACKPIN (10) into the WEIGHTSTACKas shown in FIGURE13.
¯If the HEADPLATE(24) does not sit on top of the first WEIGHTPLATE(25), push the head plate down,insert the SELECTOR
(10)and performseveral repetitions on the machine.This will relax the cable systemand prevent the HEADPL~E(24) fromlifting
¯If after completingthe previousstep the HEADPLATE(24) still does not sit on top of the first WEIGHTPLATE(25) or if there excess slack in the cable system,adjust the threadedendof the CABLEaccordinglyandretighten the jamnut.
Thankyou for purchasing the Parabody897104 WEIGHTSTACKOPTIONIf. unsure of proper use of equip- ment,callyour local Parabodydistributor or call the Parabodycustomerservice departmentat (800)
I | 1,2 I | ,/2 | I | 1/2 | I | 1/2 | I | 1/2 | I | 1/2 |
0 | 1 | 2 |
| 3 | I I t I I |
|
| 6 | ||
I | 1 [ I I | I [ I I | t | I I I |
|
|
| |||
|
|
|
|
| 10 |
|
|
|
|
|
