ParaBody 897104 manual Step

STEP 8:

Insert two GUIDERODS(4) into the STACK BASE( 1 ) as shownin HIGURE8. Lubricatethe GUIDERODS(4) with a slicon or teflon spray that is available at mosthardwarestores.

	¯	Slide two WEIGHTS~[ACKCUSHIONS(21)
3/8 X1-1/4"t
		dom~over the GUIDERODS(4). See FIGURE

Using EXTREMECAREslide twenty WEIGHT PLATES(25) downover the GUIDERODS(4) with the key-hole facing as shownin FIGURE8.

Securely assemble the 20 HOLESELECTOR SHAFT(5) to the HEADPLATE(24) using

3/8 X 1-1/4" BOLT(12) and one 3/8" WASHER (15). (Note: The bolt hole in the HEADPLATE

(24)shouldbe on top.)

¯Carefully Slide the HEADPLATEASSEMBLY

(5 &24) downover the GUIDERODS(4) the weight stack as shownin FIGURE8.

¯Slide two 13/16" SHAFTCOLLARS(9) over the GUIDERODS(4) as shownin FIGURE

Apply one set of WEIGHTSTACKLABELS- 1-25 (26) to each WEIGttTPLATE(25) as shown in FIGURE8.

FIGURE 8

7