ParaBody 950 st manual Step

Step 2

A.Securely assemblethe floating pulley stop (:52), and the s.eat support (33) to the front upright using two 1/2 x 4.-1/2" bolts (90), four 1/2' washers (.79), and two 1/2" nylock nuts (B2).

B.Apply eight 1-1/2 x 3/4" glides (63) to the inside surface of the seat support (32;) as shown.

C.Securely assemble one 3/8" spring pin (62) to the seat support (33) os shown.

1"

D. Securely attach one, seat pad (45) fo the pad support (38) using two 3/8 x bolts (97), and

3/8" washers (78) as shown.

E.	Securely attach one; back pad (44) to the front upright (31) using two 3/8 x 3--3/4" bolts (96),
	two 3/8" washers (78).
F. Attach two roller pads (19) to			the	front upright (51) using one 18-1/4" roller pad shaft (42),
	="	d	3/4"	sfarlock collars (54) as shown.
	plastic washers (5.~) an two
				6