Paradox Hellas S.A DGP2-648BL, DGP2-641BL Basic Operation, Auditory Feedback Beep Tones, EVO96

2.0 Basic Operation

The following sections will introduce you to the roles of the buttons, lights, and messages on your keypad.

	Figure 1: DGP2-641BL/RB Basic Overview
AC Light:		The LCD screen will guide you
ON	= AC power	with detailed messages.
OFF	= Power failure
STATUS Light:
When Green:		Use the arrow buttons to scroll
ON	= All zones are closed.	through the current menu when the
OFF	= One or more zones are open.
		arrows appear in the LCD screen.
FLASH	= Exit Delay in progress
When Red:
ON	= Area(s) armed
OFF	= Area(s) disarmed
FLASH	= System in Alarm

Action Buttons:

Each button’s function is explained in the following sections of the manual.

Figure 2: DGP2-648BL LED Keypad Overview

AREA Lights: (A1, A2, A3 and A4)

ON	= Area armed
OFF	= Area disarmed
FLASH	= Area in alarm

STATUS Light:

When green:

ON	= All zones closed
OFF	= One or more zones are open
FLASH	= Exit Delay in progress
When red:
ON	= Area(s) armed
OFF	= Area(s) disarmed
FLASH	= System in Alarm

ACTION Lights: (Access, Stay, Force, Byp, Mem, Trbl and Prg) Lights will illuminate according to the status of the system.

Numerical Lights: (Zones)

ON	= Zone is open
OFF	= Zone is closed (OK)
FLASHES	= Zone / fire loop
AC Light:
ON	= AC Power (OK)
OFF	= Power failure

The keypad will display the status

of all its assigned areas.

2.1Auditory Feedback (Beep Tones)

When you enter information on the keypad, the keypad will guide you with beep tones to communicate the acceptance or rejection of your entries.

Confirmation Beep: When an operation (i.e. arming/disarming) is successfully entered or when the system switches to a new status/mode, the keypad emits an intermittent beep tone (“BEEP-BEEP-BEEP-BEEP-BEEP”).

Rejection Beep: When the system reverts to a previous status, or when an operation is incorrectly entered, the keypad emits a continuous beep tone (“BEEEEEEEEEEP”).

2 EVO96