Paradyne 3151 CSU manual DTE Interface Configuration Options

Table 1. DTE Interface Configuration Options

Option	Factory 1	Factory 2	Comments/Description
DTE Framing:	D4	D4	Selects D4 or ESF framing format.
	ESF	ESF
DTE Coding:	AMI	AMI	Selects AMI or B8ZS line coding
	B8ZS	B8ZS	format.
	0±133	0±133
Equal:	133±266	133±266
			Selectable extended DTE range
	266±399	266±399
(DTE Line
			capability.
Equalizer)
	399±533	399±533
	533±655	533±655
Extrn DLB:	Enab	Enab	Allows control of DLB on external
(External DTE
	Disab	Disab	contact closure.
Loopback)
Send AIS:	Enab	Enab	Sends AIS to the DTE on failure of the
	Disab	Disab	Network interface signal.
Yellow:	Enab	Enab	Transcodes and sends Yellow signal to
			the DTE on receiving Yellow from the
	Disab	Disab
			Network.

Table 2. Network Interface Configuration Options (1 of 2)

Option	Factory 1	Factory 2	Comments/Description
	D4	D4
NET Framing:			Selects D4 or ESF framing format.
	ESF	ESF
	AMI	AMI	Selects AMI or B8ZS line coding
NET Coding:
	B8ZS	B8ZS	format.
	0.0	0.0
	±7.5	±7.5
LBO:			Line Build Out in dB.
	±15.0	±15.0
	±22.5	±22.5
	Enab	N/A	Sends ANSI Performance Report
ANSI PRM:
	Disab		Messages.
	Enab	Enab	Specifies whether the FDL's
Mgmt Link:
	Disab	Disab	Management Link is enabled.
	Enab	Enab	Network-initiatedLLB allows LLB to be
NET LLB:
	Disab	Disab	controlled by inband LLB codes.

5