COMSPHERE 3800Plus Modems
9-2 October 1998 3980-A2-GB30-40
Speaker
Speaker allows you to make temporary adjustments to
the modem’s speaker volume. Upon a reset, speaker
volume returns to its configured setting. For more
information on speaker settings, refer to the Misc section
in Chapter 8, Configure Branch.
To access Speaker from the Control branch, make the
following selections:
F1
Control : >
Speaker Reset
F2 F3
Select Speaker.
F1
Speaker Control : >
Off Low Med
F2 F3
Press the key and appropriate function keys to
choose the desired selection.
DCP selections are
Off Turns the speaker off.
Low Adjusts speaker to low volume.
Med Adjusts speaker to medium volume.
High Adjusts speaker to high volume.
Command Complete appears on the LCD.
To exit Speaker and remain in the Control branch,
press the key. To exit and return to the Top-Level
menu, press the key.
AT Command Equivalent
The AT commands for ON/Off are M0, M1, and M2.
The AT commands for volume control are L0, L1, L2,
and L3.
Reset
Reset causes the modem to stop operation and perform
a complete program restart. The modem begins the
power-up test sequence that ends with the Top-Level
menu displayed on the LCD. Configuration options stored
in an Active (Saved) configuration area are copied to the
Active (Operating) configuration area.
To access Reset from the Control branch, make the
following selection:
F1
Control : >
Speaker Reset
F2 F3
Select Reset.
F1
Reset
F2 F3
Reset appears before the modem performs the
power-up diagnostic test sequence.
AT Command Equivalent
The AT command for Reset is Z9.