Paradyne 3980-A2-GZ40-20 Installing the SDC Feature

2November 1996 3980-A2-GZ40-20

SYNCHRONOUS

DTE

INTERCHANGE

CIRCUITS

FUNCTION

DATA

COMPRESSION

FUNCTION

ERROR

CORRECTION

FUNCTION SIGNAL

CONVERTER LINE

CONTROL

FUNCTION

DCE

495-14785

Figure 2. Synchronous Data Compression

Installing the SDC Feature

The SDC feature can be installed using AT commands or the DCP.

To install SDC using the DCP, use this procedure.

1. Press the key until Control appears. Press F1.

2. Press the key until Install appears. Press F1.

3. If the SDC option is not visible, press the key until SDC appears.

NOTE: If SDC has been installed on this modem, SDC will not appear.

4. Press the function key (F1, F2, or F3) directly beneath SDC.

5. Enter the Product Authorization Code for SDC:

•Use the and keys to move the cursor to each digit position.

•Press F2 to increment each digit to the required value. The Product Authorization Code for SDC is:

0 1 1 9 9 3

6. Once the digits are set to the required values, press F1 (to select Ent).

7. Press the key to go to the top of the menu tree, then press the key until Status appears. Press F1.

8. Press the key until Options appears. Press F2 or F3.

9. Scroll through the installed options. SDC is listed among them.