Paradyne 3980-A2-GZ40-20 SDC User Interface

4November 1996 3980-A2-GZ40-20

SDC User Interface

When SDC is enabled, the following configuration options are available to set up the SDC feature. Some of the

configuration options are not displayed unless SDC is enabled.

V.42/MNP/Buffer (see Table 1)

•Sync Comp Mode

•SDC Negotiation

•SDC Idle Fill

•SDC Bit Encoding

•Sync DTE CRC

•SDC Delay Min

•Sync Flow Control

•TX Buff Disc Delay

•RX Buff Disc Delay

•Max Frame Size

•Cellular Enhance

DTE Interface (see Table 2)

•Sync DTE Rate

•Tx Clock Source

Contents

Main Plus COMSPHERE 3800 Modems Synchronous Data Compression Feature Document Number 3980-A2-GZ40-20 November 1996 Overview Installing the SDC Feature Installing the SDC Feature Using the DCP Installing the SDC Feature Using AT Commands Menu Status and Result Codes SDC User Interface (1 of 3) (2 of 3) (3 of 3) Table 2 DTE Interface Configuration Options for SDC Table 3 AT Commands for SDC AT Command Description DCP LCD Command Sequence Table 4 (1 of 2) S-Registers for SDC S-Register Description DCP LCD Command Sequence Page Synchronous Data Format SDC Algorithm DTE and DCE Frames Data Synchronization Flow Control Method SDC Negotiation Monitoring SDC Performance Tuning SDC Efficiency DTE Configuration Modem Configuration Software License Agreement