Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

3.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

4.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

5.General purpose cables are used with this product for connection to the network. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer. Use a UL Listed, CSA certified, minimum No. 24 AWG line cord for connection to the Digital Subscriber Line (DSL) network.

6.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

7.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

8.Input power to this product must be provided by one of the following: (1) a UL Listed/CSA certified power source with a Class 2 or Limited Power Source (LPS) output for use in North America, or (2) a certified transformer, with a Safety Extra Low Voltage (SELV) output having a maximum 240 VA available, for use in the country of installation.

9.In addition, since the equipment is to be used with telecommunications circuits, take the following precautions:

ÐNever install telephone wiring during a lightning storm.

ÐNever install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

ÐNever touch uninsulated telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

ÐUse caution when installing or modifying telephone lines.

ÐAvoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

ÐDo not use the telephone to report a gas leak in the vicinity of the leak.

17

Page 16 Page 18
Page 17
Image 17
Paradyne 5620 RTU installation instructions Important Safety Instructions
Page 16 Page 18

5620 RTU specifications

The Paradyne 5620 Remote Terminal Unit (RTU) is a cutting-edge device designed for modern remote monitoring and control applications. Its robust and versatile architecture makes it suitable for various industries, including utility, transportation, oil and gas, and water management. This RTU plays a crucial role in efficiently collecting, processing, and transmitting data from remote sites while ensuring high reliability and performance.

One of the standout features of the Paradyne 5620 RTU is its scalability. It can be deployed in small installations with limited I/O requirements or expanded to support larger systems with hundreds of inputs and outputs. This flexibility allows users to easily adapt the device to their specific needs, with options for analog and digital signal processing, as well as controller functionality for automated operations.

The 5620 RTU leverages advanced communication technologies, supporting multiple protocols such as Modbus, DNP3, and IEC 61850, ensuring seamless integration with existing systems and devices. Its multiple communication interfaces—including Ethernet, serial, and cellular options—facilitate real-time data exchange and remote management capabilities. This multi-protocol support enables deployment in a variety of environments, enhancing the RTU's utility across different sectors.

The Paradyne 5620 also incorporates robust security measures, ensuring that data transmission is both secure and reliable. With features like encryption and secure user authentication, organizations can safeguard sensitive information from unauthorized access, a significant consideration in today’s landscape of increasing cyber threats.

In terms of performance, the RTU is designed for extreme environments. It boasts a wide operating temperature range and is built to withstand rugged conditions, making it suitable for outdoor installations in remote locations. Furthermore, the device is energy-efficient, utilizing low power consumption, which is critical for operations in areas with limited power availability.

In conclusion, the Paradyne 5620 RTU is an advanced, feature-rich device tailored for effective remote monitoring and control. Its scalability, multi-protocol communication capabilities, strong security features, and robust design make it a reliable choice for diverse applications across various industries. As organizations seek to enhance their operational efficiency and data management strategies, the Paradyne 5620 stands out as a capable solution that meets the modern demands of remote monitoring and control technology.
Top Page Image Contents