Paradyne 8412-A1-000, 8414-A1-000, 8416-A1-000, 8415-A1-000, 8417-A1-000, 8411-A1-000 IMA Uplink

IMA Uplink

SCP cards with an IMA uplink have an RJ45M-type 50-position connector with eight Tip/Ring and eight Tip1/Ring1 connections that conforms to ANSI

T1.403-1999. The following splitter cables are available:

￿Feature Number 8026-F1-001 for the Model 8416 SCP card terminates in eight 8-pin modular jacks. See Table 2, Feature Number 8026-F1-001 Pin Assignments, on page 12.

To connect the SCP card to a switch, attach the modular jacks of the

8026-F1-001 cable to T1/E1 crossover cables, and attach the crossover cables to the switch.

￿Feature Number 8027-F1-001 for the Model 8417 SCP card terminates in 16 BNC jacks. See Table 3, Feature Number 8027-F1-001 Pin Assignments, on page 13.

To cable an SCP card with an IMA uplink:

1.Feed the supplied cable tie through the openings in the base of the 50-position connector.

2.Fasten the splitter cable to the connector with the captive panhead screw.

3.Wrap the cable tie around the cable and fasten it.

If any ferrite chokes are supplied with the SCP card, they must be installed to meet EMI requirements. Install the choke or chokes as close as possible to the

50-position connector. Hold them in place with an adjacent cable tie.

S
YSTEM
Active
Standby
Alarm
Test
ETH
ER
N
ET
TX
RX
U
PLIN
K
LK1	LK5
LK2	LK6
LK3	LK7
LK4	LK8

Supplied

Cable Tie

Mount

Panhead Screw

Cable Tie

SCP-IMA 8417

03-17422

8400-A2-GZ40-10 October 2003 7