concurrently; SAM2000G configurations cannot be saved independently. Once your IP DSLAM has been configured as desired (including the SAM2000G), settings can be flash uploaded (to a local file) through a Trivial File Transfer Protocol (TFTP) tool with a GET command and the following information:
6.1.2.1Backup
An IP DSLAM backup file records ALL management and port configurations.
ITEM | DATA NEEDED FOR BACKUP | EXAMPLE |
Host Name | DSLAM_IP Address (xxx.xxx.xxx.xxx) | 193.166.254.98 |
Remote Filename | NVR_BACKUP.BIN.[superuser password] | nvr_backup.bin.Password |
Local Filename | user preference | dslam27_mum13_backup.bin |
6.1.2.2Template
An IP DSLAM template file records all management and port configurations EXCEPT the MUM's IP Address.
ITEM | DATA NEEDED FOR BACKUP | EXAMPLE |
Host Name | DSLAM_IP Address (xxx.xxx.xxx.xxx) | 193.166.254.98 |
Remote Filename | NVR_CFG.BIN.[superuser password] | nvr_cfg.bin.Password |
Local Filename | user preference | n2n_dslam12000_template.bin |
Configuration files can also be flash downloaded FROM a local file TO an IP DSLAM, simply replace the GET command with a PUT command. Refer to your TFTP user manual for further instruction.
6.2LED Indications
LED |
| State |
| Indication |
| Additional Information |
|
|
|
|
|
|
|
Power (PWR) |
| solid green |
| SAM2000G is |
| If the Power LED is not illuminated, it is unlikely |
|
|
|
| operational |
| that the |
|
|
|
|
|
| which case none of the LEDs will be illuminated. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SHDSL Link (Lk) |
| pulsing |
| SHDSL connection |
| The SHDSL link is operational and traffic is |
|
| green |
| is established and |
| flowing. |
|
|
|
| active |
|
|
|
| solid green |
| problematic SHDSL |
| A connection exists but there is indication of a |
|
|
|
| connection |
| problem with the SHDSL line. |
|
| no |
| no SHDSL |
|
|
|
| illumination |
| connection |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
