Parasound Operating Your C/DP-1000 Power Switch, Open/Close, Play/Pause, Track Skip, Disc Skip

The ADAM is attached to a plate which replaces the one you just removed.There is a small 4 pin con- nector socket on the top of the main printed circuit board of your C/DP-1000, just inside the exposed opening of the rear panel. Attach the connector on the wire coming from the ADAM to this connector; there is only one direction you can fit the plug onto the socket. Make sure it is firmly connected, but if there is resistance, don’t force it! Try the other direction first so you don’t break the connector. Secure the ADAM with the two screws. Your C/DP-1000 is now a highly sophisticated CD Transport.

ST Optical AES/EBU

3

+G

2 1

Digital Output

ADAM-Advanced Digital Adapter Module

Operating Your C/DP-1000

Power Switch

Use this to turn the unit on and off. This control is not duplicated on the remote control handset since you will have to load a disc on the player before using it anyway.

Open/Close

Press once to open the disc carousel; press again to close. Never interfere with the carousel opening or closing or try to force it with your hand. Make sure the carousel is closed before you turn off the power.

Play/Pause

Press Play to listen to the disc. Press a second time to pause precisely at any location. Press Play once again to resume. During Play or Pause the laser is operating. You can also use the Play button while the disc loading tray is open and it will automatically close the tray and commence normal play.

Track Skip

These buttons skip tracks each time they are pressed. If you are in the middle of a track, pressing this button once will return play to the beginning of that track.

Disc Skip

These buttons skip tracks each time they are pressed. If you are in the middle of a track, pressing this button once will return play to the beginning of that track.

Search

This is a fast review or fast forward cue to assist you in finding a specific segment within a given track.

Stop

This disengages the laser operation and stops the disc. Once you’ve pressed Stop, if you press Play again the player will have to spin the disc again for a few seconds before Play can resume.

-3-