Parasound C/DP-1000 Remote Control Handset, Repeat, Program, Other Display Functions

Remote Control Handset

The Remote Control Handset duplicates all front panel functions except power on/off. It also contains several additional functions. The remote uses 2 AA batteries; be sure to observe correct polarity.

Repeat

If you press this button, the disc will play over and over until you press the STOP or REPEAT button again.

Display

Press this button once to change from normal mode to time remaining on disc, press twice for time elapsed on disc, press three times to return to the normal mode.

02 :31	-15:45	02:31
2TRACK MIN SEC	MIN SEC	MIN SEC
Normal mode	First Press: Time remaining on disc	Second Press: Time elapsed on
		disc.

Program

Programming allows you to select specific tracks or rearrange the entire play sequence. Programming must be performed in the STOP mode. To store tracks on a disk, select the track number with the number or SKIP buttons on the remote handset. Next, press the PROGRAM button to store the selected track. The display will indicate 01 for the first programmed track. The display will then flash 02 until you select the next track and press PROGRAM. Repeat this procedure for each of the tracks you want to store. A maximum of 20 tracks may be programmed. Once the PLAY/PAUSE button is pressed, the tracks will play in programmed order.

01	02	20
PRGM 4 TRACK	PRGM 3 TRACK	PRGM 5 TRACK

Select track number directly or with the SKIP button. Press PROGRAM to store

Press SKIP or track number for next track to program. Press PRO- GRAM again to store

When programming is finished, press PLAY to start programmed play.

Checking, Changing, and Clearing Program

Each time you press the PROGRAM button, the track number and its program position will appear in the display. You can add tracks to the program by pressing PROGRAM for the track you want to add. Tracks can be cleared individually by pressing the CLEAR button for the track you want to delete.

Other Display Functions

When you first play your C/DP-1000, its display panel will show you if the unit has recognized a play- able undamaged CD in its disc compartment. You will hear the machine spin for a moment while it studies the data coded onto the disc. If there is no disc present, the display will indicate four zeros. Once there is a disc loaded, the system will scan the information on the disc, from beginning to end, and will briefly show you how many tracks and the total playing time contained on that disc.

After displaying the track and playing time information, the unit will stop at track 1 and wait for you to press the PLAY button. At the end of the disc, the display will read 0:00 after the unit has stopped.

-4-