JVC CA-NXCDR7R manual Playing Back a Disc-Normal Play, Repeating Tracks-Repeat Play, Press CDR 3

Notice you cannot use Program Play and Random Play while playing a disc on CD Recorder.

Playing Back a Disc—Normal Play

You can play back both finalized and unfinalized discs on CD Recorder.

On the remote control ONLY:

1 Press 0CDR.

The unit automatically turns on and the CDR disc tray comes out.

•If the sliding panel is closed, it moves down automatically before the CDR disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

Good
	No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press CDR 3/ 8.

The CDR disc tray also closes and CD Recorder starts playing the loaded disc. The CDR lamps start flashing.

•If you press 0CDR again in this step, the disc tray closes, but playback does not start.

	Track number
		CDR
1 2 3		CD-RW

UNFINALIZE DISC

Elapsed playing time

Ex.: When an unfinalized CD-RW is loaded

To close the CDR disc tray, press 0CDR again.

To stop playback for a moment, press CDR 3/ 8. To resume play, press CDR 3/ 8again.

To stop during play, press 7.

To remove the disc, press 0 CDR on the unit.

•When you try to eject the unfinalized CD-R or CD-RW, “FINALIZE ?” appears and flashes in the main display. If you do not finalize the disc, press 0CDR again.

If you do finalize the disc, press FINALIZE. (See also “Finalizing a Disc—CD-R/CD-RW” on page 41.)

Basic Disc Operations

To locate a particular point in a track during play

On the remote control:

Press and hold ¡/ ¢ or 4/ 1.

On the unit:

Press and hold ¢ or 4.

•¡/ ¢(¢): Fast-forwards the tracks.

•4/ 1(4): Fast-reverses the tracks.

To go to another track

On the remote control:

Press ¡/ ¢or 4 / 1repeatedly.

On the unit:

Press ¢or 4 repeatedly.

•¡ / ¢(¢): Skips to the beginning of the next or succeeding tracks.

•4/ 1(4) : Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons

On the remote control ONLY:

Press the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

Repeating Tracks—Repeat Play

You can repeat an individual track or all tracks in a disc many times as you like.

On the remote control ONLY:

Press REPEAT repeatedly during or before playing.

•Each time you press the button, Repeat Play mode changes and appears in the main display as follows:

		CDR
1 2 3	1CD	CD-RW

UNFINALIZE DISC

REPEAT 1CD REPEAT 1

REPEAT OFF

(Canceled)

Ex.: When “REPEAT 1CD” is selected

•REPEAT 1CD: Repeats all the tracks.

• REPEAT 1:	Repeats one track.
• REPEAT OFF:	Cancels Repeat Play.

– 30 –