JVC LVT0749-003A, CA-NXCDR7R manual Using the REC MODE button

■Using the REC MODE button

On the unit ONLY:

1 Prepare discs in 3-CD Changer.

•If the current playing source is not 3-CD changer, press CD 3/ 8, then 7. To select a disc, press DISC repeatedly, then 7.

You can also use the remote control. When using it, press CD1, CD2, or CD3, then 7.

You can make a program (see page 25) if you want. (But you cannot select Random Play.)

2 Insert a recordable CD-R or CD-RW on the CDR disc tray.

3 Press REC SPEED (inside the sliding panel) if necessary.

•Each time you press the button, recording speed alternates between normal speed and high speed*.

AUTO TRACK		AUTO TRACK
NORMAL
SPEED	CD-RW	HIGH SPEED	CD-RW
REC LEVEL dB	UNFINALIZE DISC	REC LEVEL dB	UNFINALIZE DISC

*For CD-R, 4 times normal speed; for CD-RW, 2 times normal speed.

When high speed is selected, recording input level is reset to “0” temporarily, and will not affect the recording.

4 Press REC MODE (inside the sliding panel) to select “CD REC?” or “CD REC & FINALIZE ?”

•Each time you press the button, recording modes change as follows:

CD	AUTO TRACK
	NORMAL
1 2 3	SPEED	CD-RW
	REC LEVEL dB	UNFINALIZE DISC

CD REC? = 1st Tr. REC? = SET=LISTENING? =

CD REC & FINALIZE? =SET=LISTENING & FINALIZE? = Canceled =(Goes back to the beginning)

•CD REC ?: Select this to perform CD Direct Recording.

•CD REC & FINALIZE ?: Select this to automatically finalize the disc after recording.

5 Press REC START (inside the sliding panel).

CD	AUTO TRACK
	NORMAL
1 2 3	SPEED	CD-RW
	REC LEVEL dB	UNFINALIZE DISC

•If OPC (see page 32) is being performed, “UPDATE OPC” flashes first in the main display, then recording starts.

		CD	AUTO TRACK
			NORMAL
1	2	3	SPEED	CD-RW
			REC LEVEL	REC UNFINALIZE DISC

Remaining time of the	Remaining time in the
currently playing track	CD-R/CD-RW

Recording stops when a selected disc (or a program) is recorded.

•Both 3-CD Changer and CD Recorder stop automatically.

To confirm the recording contents, see “To change the display information while recording” on page 35.

To stop recording, press 7. “STOP DUBBING” flashes for a while. (In this case, the disc will not be finalized even if you have selected “CD REC & FINALIZE ?” in step 4.)

•Both 3-CD Changer and CD Recorder stop automatically.

To remove the recorded disc, press 0CDR. “FINALIZE ?” flashes in the main display for a while if you have selected “CD REC?” in step 4.

•If you do finalize the disc, press FINALIZE. Remember once you finalize a CD-R, no further recording can be made on the disc. (For more details, see “Finalizing a Disc—CD-R/CD-RW” on page 41.)

•If you do not finalize the disc, press 0 CDR again.

If “SHORT REM. OK ?” appears when you press

REC START

There is not enough remaining time left on the recordable disc. Eject and change a disc or press REC START one more time to start recording anyway (the entire source disc cannot be recorded in this case).

During CD Direct Recording

Repeat Play will be canceled automatically.

– 37 –