JVC LVT0749-003A, CA-NXCDR7R manual Listening Edit Recording, Using the REC MODE button ONLY

Listening Edit Recording

Listening Edit Recording allows you to make a program while listening and checking each track of the loaded discs (up to 3 discs) in 3-CD Changer, then to start recording the program.

• You can program up to 32 tracks.

■Using the REC MODE button ONLY

On the unit ONLY:

1 Prepare discs in 3-CD Changer.

•If the current playing source is not 3-CD changer, press CD 3/ 8, then 7. To select a disc, press DISC repeatedly, then 7.

You can also use the remote control. When using it, press CD1, CD2, or CD3, then 7.

•If the current play mode is either Program Play or Random Play, press FM/PLAY MODE on the remote control to select Continuous Play.

2 Insert a recordable CD-R or CD-RW on the CDR disc tray.

3 Press REC SPEED (inside the sliding panel) if necessary.

• Each time you press the button, recording speed alternates between normal speed and high speed*.

AUTO TRACK		AUTO TRACK
NORMAL
SPEED	CD-RW	HIGH SPEED	CD-RW
REC LEVEL dB	UNFINALIZE DISC	REC LEVEL dB	UNFINALIZE DISC

*For CD-R, 4 times normal speed; for CD-RW, 2 times normal speed.

When high speed is selected, recording input level is reset to “0” temporarily, and will not affect the recording.

4 Press REC MODE (inside the sliding panel) to select “SET =LISTENING?” or “SET =LISTENING &

FINALIZE ?”

• Each time you press the button, recording modes change as follows:

CD	AUTO TRACK
	NORMAL
1 2 3	SPEED	CD-RW
	REC LEVEL dB	UNFINALIZE DISC

CD REC? = 1st Tr. REC? = SET=LISTENING? =

CD REC & FINALIZE? =SET=LISTENING & FINALIZE? = Canceled =(Goes back to the beginning)

•SET=LISTENING ?: Select this to perform Listening Edit Recording.

•SET=LISTENING & FINALIZE ?: Select this to automatically finalize the disc after recording.

5 Press SET (inside the sliding panel).

3-CD Changer starts playing.

•Playback starts from the currently selected disc if two or three discs are loaded.

6 Decide if you want to include the current track in the program or to skip it.

•To include the current playing track in the program, press SET.

The current playing track is programed and the next track starts playing. (After the last track of a disc is programed, the first track of the next disc starts playing.)

•To skip the current playing track, press CANCEL. The current playing track is not programed and the next track starts playing.

If you do not press either button while the current track is playing, 3-CD Changer will skip the track and play the next track.

7 Repeat step 6 to program other tracks.

When you finish checking all tracks or if there is no more remaining time on the recordable CD-R or CD-RW, Listening Edit Recording starts automatically.

•If the remaining time of the CD-R or CD-RW becomes short, CD Recorder will search for a track fitting into the remaining time. To include the track found in the program, press SET. To find another, press CANCEL.

To stop during editing process and start recording, press

REC START.

To confirm the recording contents, see “To change the display information while recording” on page 35.

To stop recording, press 7. “STOP DUBBING” flashes for a while. (In this case, the disc will not be finalized even if you have selected “SET =LISTENING & FINALIZE ?” in step 4.)

•Both 3-CD Changer and CD Recorder stop automatically.

To remove the recorded disc, press 0CDR. “FINALIZE ?” flashes in the main display for a while if you have selected “SET =LISTENING?” in step 4.

•If you do finalize the disc, press FINALIZE. Remember once you finalize a CD-R, no further recording can be made on the disc. (For more details, see “Finalizing a Disc—CD-R/CD-RW” on page 41.)

•If you do not finalize the disc, press 0 CDR again.

During Listening Edit Recording

Repeat Play will be canceled automatically.

– 39 –