JVC CA-NXCDR7R Loading Discs, Playing Back the Entire Discs-Continuous Play, Disc tray closes

Continued

The built-in 3-CD Changer can play back both finalized

and unfinalized CD-Rs/CD-RWs. However, some unfinalized discs cannot be played back because of their disc characteristics.

Loading Discs

On the unit ONLY:

1 Press one of the open/close buttons (0 CD1, 0CD2, and 0CD3) for the disc tray you want to load a CD onto.

The unit automatically turns on and the selected disc tray comes out.

•If the sliding panel is left open, it moves up automatically before the disc tray comes out.

2 Place a disc correctly on the circle of the disc tray, with its label side up.

Good No good

•When using a CD single (8 cm), place it on the inner circle of the disc tray.

3 Press the same open/close button (0CD1, 0CD2, or 0CD3) you have pressed in step 1.

The disc tray closes.

When loading more than one disc continuously

Press the open/close button (0CD1, 0CD2, or 0CD3) for the next tray you want to place a disc onto. The first disc tray automatically closes and the next disc tray comes out.

Playing Back the Entire Discs—Continuous Play

You can play discs continuously.

1 Load discs into 3-CD Changer.

2 Select a disc, and start playback.

On the unit:

1Press DISC repeatedly to select the disc you want.

2Press CD 3/ 8.

On the remote control:

Press one of the disc number buttons (CD1, CD2, and CD3).

Track No.

			CD
			NORMAL
1	2	3	SPEED
			REC LEVEL	dB

Disc No. Elapsed playing time

CD playback starts from the first track of the selected disc.

• Without selecting the disc number, pressing

CD 3/ 8 starts playing back the currently selected CD.

To stop playback for a moment, press CD 3/ 8. To resume play, press CD 3/ 8 again.

To stop during play, press 7.

To remove the disc, press the corresponding open/close buttons (0CD1, 0 CD2, or 0 CD3) on the unit.

Disc playback sequence in 3-CD Changer

When 3 discs are loaded on the disc trays, they are played in one of the following sequences.

•When CD 1 is pressed : CD 1 ]CD 2 ] CD 3 (then stops)

•When CD 2 is pressed : CD 2 ]CD 3 ] CD 1 (then stops)

•When CD 3 is pressed : CD 3 ]CD 1 ] CD 2 (then stops) * If no disc is on the disc trays, 3-CD Changer skips such an

empty tray.

If the current disc is a CD Text

You can change the information in the main display. See “To show the text information recorded on a CD Text” on page 28.

– 24 –