JVC CA-NXCDR7R, LVT0749-003A manual Connecting Other Components, To connect digital components

Connecting Other Components

When you connect and use other components, refer also to the manuals supplied with them.

• DO NOT connect other components while the power is on.

•DO NOT plug in any component until all connections are complete.

To connect an analog component such as a cassette deck

Be sure that the plugs of the audio cords and the jacks on the rear of the unit are color-coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.

You can enjoy playback and recording on the other connected component.

			LINE IN
			R
SPEAKERS
R		L	R
			LINE OUT
			FM
R		L	(75 )
			COAXIAL
CAUTION :
SPEAKER	IMPEDANCE
	6	16	AM
			LOOP
			AM
			EXT
			ANTENNA
			OPTICAL
			LINE
			DIGITAL IN
			3CD
			DIGITAL OUT
			To input (REC)
	Ex.: cassette deck
			To output (PLAY)

By using audio cords (not supplied), connect:

•Between the audio input jacks on the cassette deck and the LINE OUT jacks.

•Between the audio output jacks on the cassette deck and the LINE IN jacks.

To connect digital components

•When connecting a digital component equipped with an optical digital output terminal

The following connection allows you to perform digital- to-digital recording (through the digital terminals) and playback of the connected digital component (through the analog terminals.)

				LINE IN
			R	L
SPEAKERS
R		L	R	L
				LINE OUT
			FM
R		L	(75	)
			COAXIAL
CAUTION :
SPEAKER	IMPEDANCE
	6	16	AM
			LOOP
				AM
				EXT
				ANTENNA
		Protective cap		OPTICAL
				LINE
				DIGITAL IN
				3CD
				DIGITAL OUT
Before connecting the
other component, remove
the protective cap from
the terminal.
			To optical digital output
Audio component with
optical digital output
			To output (PLAY)

By using an optical digital cord (not supplied) and an audio cord (not supplied), connect:

•Between the optical digital output terminal on the other component and the LINE DIGITAL IN terminal.

•Between the audio output jacks on the other component and the LINE IN jacks. (This connection is required to play back sounds through this unit when the source is “LINE.”)

The digital connection through the LINE DIGITAL IN terminal can be only used for recording.

•When connecting a digital component to this unit, always connect it both the LINE DIGITAL IN terminal and the LINE IN jacks.

– 10 –