JVC LVT0749-003A To adjust the recording input level, To make a silent portion in your recording

To adjust the recording input level

You can adjust the recording input level.

Once adjustment is made, it is memorized, and will be recalled when you record any source on CD Recorder, using any recording method (except when high speed recording is selected).

While adjusting the recording input level, the sounds through the speakers and headphones also change so that you can check the difference by your own ears.

On the unit ONLY:

1While CD Recorder is in recording pause mode, press REC LEVEL (inside the sliding panel).

Now the VOLUME control (and VOLUME +/– on the remote) works to adjust the recording level.

	AUTO TRACK
1 2 3			CD-RW
	dB REC
		REC LEVEL	UNFINALIZE DISC

2Turn the VOLUME control while listening to the playback sound.

•Adjust the recording input level so that the OVER indicator never lights.

Recording input level is also shown here

	AUTO TRACK
1 2 3			CD-RW
		dB REC
	REC LEVEL		UNFINALIZE DISC

•You can adjust the recording input level within the range of +12 dB to –12 dB in 2 dB intervals. Normally set it to 0 dB (initial setting at factory).

3Press REC LEVEL again to finish the adjustment. Now the VOLUME control (and VOLUME +/– on the remote) works as usual to adjust the volume level.

4Press 7to cancel recording pause mode.

•If you press CDR 3/ 8, standard recording (see page

34)will start.

When you unplug the AC power cord or if a power failure occurs

Input level adjustment will be erased in a few days. If this happens, adjust the input level again.

To make a silent portion in your recording

You can record a 4-second silence when using Standard Recording. This is convenient when recording tracks from many discs.

•This function can be used both for digital and analog recording.

To make a silent portion in your recording, press REC MUTE on the unit while recording.

Recording enters recording pause mode after recording a 4- second silence. (You can also make a silent portion as long as you want by holding the button.)

To resume recording, press CDR 3/ 8. (A track mark is recorded when you resume recording.)

To change the display information while recording

You can change the information in the main display.

•For display information during playback, see “Changing the Display Information” on page 15.

On the remote control ONLY:

Press DISPLAY repeatedly.

•Each time you press the button, the information in the main display changes as follows:

■When the source is 3-CD Changer:

• During Standard Recording

		Remaining time		&	Remaining time
		of the playing track			in CD-R/CD-RW
						CD track number
Playback source
	indication					& CDR track number
			Clock			*
					(see below)

• During CD Synchronized Recording (see page 36)

	Remaining time	&	Remaining time
	of the playing track		in CD-R/CD-RW
			CD track number
Clock
			& CDR track number

Playback source

* indication (see below)

*When the current playback source is a CD Text, CD Text information will be shown. See “To show the text information recorded on a CD Text” on page 28.

■When the source is other than 3-CD Changer:

Remaining time	CDR track number
in CD-R/CD-RW
	Playback source
Clock
	indication

– 35 –