JVC LVT0749-003A, CA-NXCDR7R Recording a Single Track during Play, Finalizing a Disc-CD-R/CD-RW

Recording a Single Track during Play

You can record the current track while playing back a disc on 3-CD changer.

•If a recordable disc is not loaded, “CDR NO DISC” appears in the main display. Insert a recordable CD-R or CD-RW.

7Using the DIRECT REC button

On the unit ONLY:

Press DIRECT REC while playing back or pausing a track you want to record.

Playback of that track is stopped, and the same track starts playing from the beginning again. This time, CD Recorder starts recording the track.

7Using the REC MODE button On the unit ONLY:

1 Press REC MODE (inside the sliding panel) repeatedly, while playing back or pausing a track you want to record until “1Tr. REC ?” or “AUTO LEVEL CONTROL REC ?” appears in the main display.

•You cannot select “AUTO LEVEL CONTROL REC ?” when high-speed recording is selected. If this happens, press REC SPEED once to select normal speed recording.

1Tr. REC ?:

Select this to record the current track without input level adjustment.

AUTO LEVEL CONTROL REC ?:

Select this to record the current track with input level adjustment.

2 Press REC START (inside the sliding panel).

•When “1Tr. REC ?” is selected: Playback of that track is stopped, and the same track starts playing from the beginning again. This time, CD Recorder starts recording the track.

•When “AUTO LEVEL CONTROL REC ?” is selected: Playback of that track is stopped, and the same track starts playing from the beginning again. In the first playback, CD Recorder checks the recording condition of the track and adjusts the recording level without recording. (“LEVEL ADJUST” flashes in the main display.)

Then when the second playback starts, CD Recorder starts recording the track.

After the track is recorded, both 3-CD Changer and CD Recorder stop.

Finalizing a Disc—CD-R/CD-RW

Finalization is the final process in recording on a CD-R or CD-RW. “Finalizing a disc” means writing the TOC (Table of Contents) on the recorded disc.

Only after this process is completed, a recorded CD-R or CD-RW can be played back on a CD player compatible with CD-R/CD-RW.

Before you start....

•Once a CD-R has been finalized, no further recording can be made on the disc.

•If you unplug the power cord or if a power failure occurs during finalization process, recorded data will be lost and the disc may not be utilized any more.

On the unit ONLY:

1 Insert a disc you want to finalize on the CDR disc tray.

•If a disc is being played on 3-CD Changer, press 7to stop playback.

2 Press FINALIZE.

“FINALIZE ?” appears in the main display.

	AUTO TRACK	CDR
1 2 3		CD-RW
		UNFINALIZE DISC

• If you want to cancel finalization, press CANCEL.

3 Press FINALIZE again to finalize the disc.

The REC indicator lights and “FINALIZE” starts flashing during finalization.

		AUTO TRACK	CDR
1	2	3	CD-RW
			REC UNFINALIZE DISC

•The finalization process requires about a few minutes to complete (when finalized, the REC indicator goes off and “FINALIZE” stops flashing and goes off).

To unfinalize a CD-RW,see “Unfinalizing a Disc (Only for CD-RW)” on page 46.

– 41 –