JVC LVT0749-003A, CA-NXCDR7R manual Adjusting the Volume, Changing the Display Information

Adjusting the Volume

You can adjust the volume level only while the unit is turned on.

When using the remote control, press VOLUME + to increase the volume or press VOLUME – to decrease it.

When using the unit, turn VOLUME clockwise to increase the volume or counterclockwise to decrease it.

UNFINALIZE DISC PITCH SLEEP RDSEON [ TA News Info ] REC LEVEL dB REC UNFINALIZE DISC

Ex.: When setting the volume level to “20”

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

If “CANNOT LISTEN” appears in the main display

During high-speed recording (see page 33), you cannot listen to any source, and therefore, cannot adjust the volume level.

For adjusting the recording level

Normally, the VOLUME control and VOLUME +/– buttons work to adjust the playback sound volume.

If you want to adjust the recording level, see “To adjust the recording input level” on page 35.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

Changing the Display Information

You can change the information in the main display.

•For display information while recording, see “To change the display information while recording” on page 35.

On the remote control ONLY:

Press DISPLAY repeatedly.

•Each time you press the button, the information in the main display changes as follows:

■When the source is CD Recorder:

• Before playing—

	Total track number/		Remaining time
	Total playing time			in the disc
		Clock
• While playing—
	Track no./				Clock
	Elapsed playing time

■When the source is other than CD Recorder:

SourceClock indications

When the current playback source is a CD Text in 3- CD Changer

See “To show the text information recorded on a CD Text” on page 28.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is maintained regardless of how low you set the volume—Active Bass.

•You can use this effect only for playback, but not for recording.

On the remote control ONLY:

Press BASS so that “ACT-BASS ON” appears in the main display.

The BASS indicator also lights on the display.

•Each time you press the button, Active Bass turns on and off alternately.

CD

			NORMAL
1	2	3	SPEED

REC LEVEL dB

ACT-BASS ON ACT-BASS OFF

To cancel the effect, press the button again so that “ACT-BASS OFF” appears in the main display (and the BASS indicator goes off).

– 15 –