JVC CA-DXJ35 manual Setting the Clock, To adjust the picture tone, Changing the Display Brightness

To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 on page 15.

2Select a parameter you want to adjust.

GAMMA	Adjust if the neutral color is bright
	or dark. The brightness of dark and
	bright portions is maintained
	(–3 to +3).
BRIGHTNESS	Adjust if the picture is bright or dark
	as a whole (–8 to +8).
CONTRAST	Adjust if the far and near position is
	unnatural (–7 to +7).
SATURATION	Adjust if the picture is whitish or
	blackish (–7 to +7).
TINT	Adjust if the human skin color is
	unnatural (–7 to +7).
SHARPNESS	Adjust if the picture is indistinct
	(–8 to +8).

3Adjust the parameter.

4Repeat steps 2 to 3 to adjust other parameters. To erase the VFP screen, press VFP again.

Changing the Display Brightness	Remote
	ONLY

DIMMER 1 DIMMER 2

DIMMER OFF

(Canceled)

(while holding...)

DIMMER 1 Dims the display.

DIMMER 2 Dims the display more than DIMMER 1.

Setting the Clock	Remote	INFO
	ONLY

Without setting the built-in clock, you cannot use any timers except the Sleep timer.

•To exit from the clock setting, press CLOCK/TIMER as required.

•To correct a misentry during the process, press CANCEL while holding SHIFT. You can return to the previous step.

1Activate clock setting mode.

(while holding...)

•If you have already adjusted the clock before, press the button repeatedly until the clock time starts flashing.

2Adjust the hour, then minute.

Now the built-in clock starts working.

To display the clock during playback

For “DVD/CD” and “USB MEMORY”:

Disc/file type

(while holding...)

Clock

Playback information

For “TAPE,” “TUNER FM,” “TUNER AM” and “AUX”:

Current source information

(while holding...)

Clock

16