JVC CA-DXJ35 manual Applying an Optimal Bass Sound Effect–VARIOBASS, Reinforcing the Bass Sound

•For JPEG playback...

–This System can play back JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower).

–It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.)

–This System can play only baseline JPEG files*. Progressive JPEG files* or lossless JPEG files* cannot be played.

*Baseline JPEG format: Used for digital cameras, web, etc.

Progressive JPEG format: Used for web.

Lossless JPEG format: An old type and rarely used now.

•For MPEG-1/MPEG-2 playback...

–This System can play back MPEG-1/MPEG-2 files with the extension code <.mpg> or <.mpeg> (regardless of the letter case—upper/lower).

–The stream format should conform to MPEG system/ program stream.

–720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is recommended for the highest resolution.

–This System also supports the resolutions of 352 x 576/ 480 x 576/352 x 288 pixels (25 fps) and 352 x 480/480 x 480/352 x 240 pixels (30 fps).

–The file format should be MP@ML (Main Profile at Main Level)/SP@ML (Simple profile at Main Level)/ MP@LL (Main Profile at Low Level).

–Audio streams should conform to MPEG1 Audio Layer-2 or MPEG2 Audio Layer-2.

•For ASF playback...

–This System can play back ASF files with the extension code <.asf> (regardless of the letter case—upper/lower).

–This System supports ASF files whose resolution is 352 x 288 pixels or less.

–Some recorded files may not be able to played back depending on file characteristics, kind of digital still/ video cameras, or recording conditions.

•For DivX playback...

–The System supports DivX 6.x, 5.x, 4.x and 3.11.

–When making a disc, use the UDF-Bridge format. “Multi-border” is not supported.

–The System supports DivX files whose resolution is 720 x 480 pixels or less (30 fps), and 720 x 576 pixels or less (25 fps).

–Audio stream should conform to Dolby Digital, MPEG1 Audio Layer- 2 or MPEG Audio Layer-3 (MP3).

–This System can play back DivX files with the extension code <.divx> <.div> <.avi> (regardless of the letter case—upper/lower).

–The System does not support GMC (Global Motion Compression).

–The file encoded in the interlaced scanning mode may not be played back correctly.

Daily Operations—Sound & Other Adjustments

(see pages 13 to 16)

Reinforcing the Bass Sound:

•You cannot adjust the Active Bass level when the headphones are connected.

Applying an Optimal Bass Sound Effect–VARIO BASS

•If you plug in a microphone and Mic Mixing is activated, the System will automatically switches the mode to LITE.n.EASY even if the mode is set to OFF.

Creating Your Own Sound Modes—User Mode:

•When you unplug the AC power cord or if a power failure occurs, the User Mode settings may be erased in a few days. If this happens, set the User Modes again.

Creating 3-dimensional Sound Field—3D Phonic:

•While you use the headphones, 3D Phonic is canceled temporarily.

–3D Phonic is also applied to the optical digital output signals through the OPTICAL DIGITAL OUTPUT terminal.

Setting the Clock:

•“0:00” will flash on the display until you set the clock.

•The clock may gain or lose 1 to 2 minutes per month. If this happens, reset the clock.

Unique Video Disc/File Operations (see pages 17

to 19)

Selecting the Audio Track:

•On some disc/file, you cannot change audio languages while playing back.

Special Picture Playback:

•During slow-motion playback, no sound will be reproduced.

•While zoomed in, the picture may look coarse.

Advanced Playback Operations (see pages 20

to 22)

Programming the Playing Order—Program Play:

–While programming steps...

Your entry will be ignored if you have tried to program an item number that does not exist on the disc (for example, selecting track 14 on a disc that only has 12 tracks).

–For SVCD/VCD/CD loaded on the other tray than the current one, the System may prompt for the group number entry as well; however, these entries will be ignored during playback.

•The programmed contents will remain until you erase it.

•While the PROGRAM indicator is on, you cannot change the disc to play. (DISC 1 – 5 on the remote control and DISC 1 – 5 # on the main unit do not work.)

41