JVC CA-DXJ35 To change the mic volume, 8Adjust the MIC LEVEL and VOLUME, Reserving Karaoke Songs

To change the mic volume	Remote
	ONLY
1

MICVOL ECHO KEYCON*

FANFARE	*	*
			SCORE LVL

*Appears only when “DVD/CD” or “USB” is selected as the source with Mic Mixing activated.

2Select the volume level.

•The mic volume level can be adjusted in 16 steps (MIC VOL 0 – 15).

Reserving Karaoke Songs

—Karaoke Program Play	ONLY	INFO
	Remote

You can determine the playback order of the titles, chapters, tracks or files on the disc player. You can program up to 12 steps.

•This function is not available for files in a USB mass storage class device.

1Select “DVD/CD” as the source.

2Turn the MIC LEVEL to “0”.

3Connect the microphone(s) (not supplied) to the MIC1 or MIC2 jack.

Mic Mixing will be automatically activated.

•If a microphone is already connected and Mic Mixing is not activated, use the MIC MIX button to reactivate Mic Mixing (see page 31).

4Activate Karaoke Program Play.

No Disc Gr/Tt Tr/Chap

	1
	2
	3
	4
	5
(while holding...)	On the TV screen

• The PROGRAM indicator flashes during this mode.

5Select songs you want for Karaoke Program Play. Press the number buttons to select a song in the following order.

1 Select a disc.

2 Select a title/group.

3 Select a chapter/track/file.

•To select a number, see “How to select a number”

on page 8.

• To cancel the procedure, press RESERVE while holding SHIFT. The PROGRAM indicator disappears.

6Start playback.

Karaoke Reserve screen disappears and playback starts in the order you have programmed.

•For the Karaoke Program Play with Karaoke Scoring: Each time the song ends, playback stops and the score board appears. Press DVD/CD 3 to start playback of the next track.

7Sing into the microphone.

8Adjust the MIC LEVEL and VOLUME.

To check the programmed contents

(while holding...)

Karaoke Reserve screen appears.

•You cannot display Karaoke Reserve screen while Karaoke Scoring is in use.

To modify the program

While Karaoke Reserve screen is shown on the TV...

To erase the unwanted step:

(while holding...)

To erase the entire program, repeat the procedure.

To add steps in the program:

Repeat step 3.

34