JVC CA-DXJ35 Listening to the Radio, Adjusting the Volume, To tune in to a station, Tuner Fm

Adjusting the Volume

The volume level can be adjusted in 32 steps (VOLUME MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).

Remote control: Main unit:

To drop the volume in a moment	Remote
	ONLY

To tune in to a station

While FM or AM is selected...

1sec.

Increases the frequency.

Decreases the frequency.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.

•When you repeatedly press the button, the frequency changes step by step.

To manually stop the searching, press either button.

To restore the volume,

press again or adjust the

volume level.

If the FM reception is poor

Remote

ONLY

(while holding...)
Listening to the Radio	INFO
To select the AM tuner interval spacing
	Main Unit
	ONLY

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—monaural reception mode.

To restore the stereo effect, press the button again (the MONO indicator goes off).

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.

To preset stations

Remote

ONLY

1Select “TUNER AM,” then turn off (standby) the System.

TUNER FM

AUX TUNER AM

2Select the AM tuner interval spacing. To select 9 kHz:

(while holding...)

To select 10 kHz:

(while holding...)

To select the band (FM/AM)

TUNER FM TUNER AM

AUX

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

•You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

•Finish the following process while the indication on the display is flashing.

•To cancel the operation during procedure, press CANCEL while holding SHIFT.

3Select a preset number for the station you store.

• To select a number, see “How to select a number” on page 8.

• You can also use ¢/4 buttons.

9