Parasound D 200 FREQUENTLY ASKED QUESTIONS continued, There is no picture using the HDMI output

30FREQUENTLY ASKED QUESTIONS continued

There is no picture using the HDMI output.

How do I turn it on without being able to see the setup menu?

-If there is a disc in the D 200, remove it.

-Turn the D 200 Off and then back On

-On the remote control press:

SETUP – ENTER – – – ENTER.

The HDMI output should now be turned on and HDMI should be displayed on the D 200’s front panel.

Note: The “” symbol refers to the right cursor button, not the PLAY button.

Why is “HDMI” flashing on the front panel?

HDMI flashes when an HDMI cable is not connected between the D 200 and an HDMI TV. If you are not using the HDMI output turn HDMI off in the VIDEO SETUP menu and it will stop flashing.

How long can the HDMI cable be from the D 200 to my TV?

The maximum HDMI cable distance will vary significantly between cable brands. Not all brands are HDMI-certified and some may use inferior materials, making long runs impossible. When an HDMI cable run is too long you may see pixels dropping out (snow over the picture) or the picture may be completely blank. We have tested the D 200 with cable runs of over 50 feet (16.5 Meters) with some cable brands. If you need to go a longer distance we strongly recommend the HDMI-certified Parasound Zhd five input switcher. You can find details on the Zhd at www. parasound.com.

What is HDCP?

HDCP (High-bandwidth Digital Content Protection) is a technology used with DVI and HDMI to prevent unauthorized duplication of digital video and audio content. HDCP compliance is required on all HDMI equipment and is an option with DVI equipment. Your TV must have HDCP or you will not be able to use the D 200’s HDMI output.