13 | OPERATING YOUR T 3 continued |
|
|
See page 18 for T 3 Front Panel and Remote Control layout
There are several ways to select a station on your T 3. Each method is described in detail below.
•Tune to the previous or the next available station
•Tune to the previous or the next frequency
•Select an individual preset station
•Directly select the station frequency
•Select the previous or the next preset station
Selecting Stations – Seek Tuning
This tunes or seeks only those stations that the T 3 can receive clearly. Seek tuning doesn’t stop at weak stations where there’s too much background noise.
Seek Tuning with the Remote Control
1Turn on the T 3 by pressing the On button on its remote control or the
2Press the Seek button on the remote control. < SEEK > will appear in the display.
3Press the large > button on the remote control to seek the next station.
4Press the large < button on the remote control to seek the previous station.
Seek Tuning at the Front Panel
1Turn on the T 3 by pressing the
2Press the < Select > button on the front panel until < SEEK > appears in the display.
3Turn the round knob slightly clockwise to seek the next station.
4Turn the knob slightly
YOU SHOULD KNOW
You only need to nudge the round knob in the direction you wish the T 3 to seek stations.
Once you’ve initiated seek you don’t need to continue turning the knob.
Manual Tuning
Manual tuning lets you find weaker stations that seek tuning rejected. It also selects frequencies where no stations are broadcasting.
Manual Tuning with the Remote Control
1Turn on the T 3 by pressing the
2Press the < Manual > button on the remote control. < MANUAL > will appear in the display.
3Press the > button to tune up.
4Press the < button to tune down.