15 | OPERATING YOUR T 3 continued |
|
|
See page 18 for T 3 Front Panel and Remote Control layout
Preset Stations
Instead of tuning to find your favorite stations, you can save them as Presets and recall them instantly from a memory bank of 1 - 30. Preset numbers appear at the lower left side of the display as P1 – P30. You can save up to 30 FM stations and 30 AM stations. You need the remote control to select the preset numbers for stations you want to save.
Saving Stations as Presets
1Tune to the station you wish to save in preset memory by either Seek or Manual tuning.
2Press the Mem button on the remote control or the Memory button on the front panel briefly.
3MEMORY in the front panel display will flash and the small indicator at the right of the panel will illuminate red to let you know that the memory is ready to accept a new preset
4Press the desired buttons P 1- P 9 & 0.
5SAVED will appear in the display for two seconds confirming the station is now saved as a preset.
6Before you can tune another station and save it as a preset, you must press the < Seek > or the < Manual > button on the remote control or the < Select > button on the front panel until < SEEK > or < MANUAL > is displayed.
7Repeat steps
YOU SHOULD KNOW
For FM, the display shows 108 when you select a preset number that doesn’t have an FM station saved to it. For AM, the display shows 1720 when you select a preset number that doesn’t have an AM station saved to it. This enables you to distinguish between preset numbers that you’ve already assigned and those that are available. You can reassign a preset number to a new station by repeating the Saving Stations as Presets above.
After you press the Memory or Mem button you need to press a preset number button within 3 seconds while the memory bank remains open. If you press the Memory or Mem button but don’t press a preset button, the existing preset station (if any) will remain unchanged.
For two digit presets, press the second preset number button within a few seconds. For example, for preset 17, press P 1 then P 7 right after. For preset 30, press P 3, then 0 right after.
After you press the button to save a single digit preset, there will be a
You can’t save a station as a preset while the T 3 display shows < PRESET >. You must select < MANUAL > or < SEEK > before saving the station.
Selecting Preset Stations
Now that your favorite stations are saved as presets, you can recall them on the front panel or with the remote control. There are several ways to recall preset stations.
Selecting Individual Preset Stations from the Remote Control
1Turn on the T 3 by pressing the
2Press the preset buttons on the remote control for the preset station you want to listen to (P 1, P 2, etc.).