®

15

WLAN1500 Wireless PC LAN Card

Chapter 3 :

Hardware Installation

This chapter will guide you through the installation of the ParkerVision Wireless LAN Card into your computer

3.1 System Requirements

•PCMCIA Type II slot

•PCMCIA card and socket service that is Revision 2.1-compliant to PCMCIA specifi cation (or higher).

•Windows 2000/XP Operating System

•500 Kbytes free hard disk space (minimum) for driver and utility program installation.

•128 MB RAM

3.2 Installing the ParkerVision Wireless LAN Card

Follow the procedure shown next to install the ParkerVision Wireless LAN Card. Refer to the appendix for important safety instructions.

Step 1. Locate available Type II or Type III PCMCIA slot in your notebook computer.

Step 2. With the ParkerVision Wireless LAN Card adapter’s 68-pin connector facing the PCMCIA slot and its label side and LED’s facing up, slide the ParkerVision Wireless LAN Card completely into the PCMCIA slot as shown next.

Never force, bend or twist the ParkerVision Wireless LAN Card into the slot