General Information
LIBRA
General Information
Moving your appliance
You may damage some soft or badly fitted floor coverings when you move the appliance. The floor covering under the appliance should be securely fixed so it does not ruck up when you move the appliance across it. Alternatively you could remove the floor covering.
To move the appliance open the oven door. Raise the appliance off its front feet by lifting from inside the oven. Pull the appliance forward. When you replace the appliance push it back to the stop and make sure there is the same gap at each rear corner.
For your safety
Do not block any of the appliance vents. Never line any part of the appliance with foil.
Do not let items which can catch fire or electric mains leads such as kettle flexes trail over any part of the appliance.
Installing the appliance
For your safety
This appliance must be installed and serviced by a competent person as stated in the Gas Safety (Installation & Use) regulations current editions.
It is important that the appliance is suitable for your gas supply. Your installer should check the rating plate.
Ensure that a stability bracket is fitted.
22
