Parkside PEH30 manual Replacing a drive belt see Figs. F + G, Maintenance and cleaning

Models: PEH30

1 14
Download 14 pages 20.19 Kb
Page 12
Image 12

Preparing for use / Maintenance and cleaning / Service centre / Warranty

2.Push the cutting element 18 sideways out from the blade shaft 17 .

3.Push the planer blade 20 sideways out from the cutting element 18 .

NOTE: The blade shaft 17 can also be taken apart, e.g. for cleaning.

4.Reassembly is carried out in the reverse order with a reversed or new planer blade.

5.Planer blades 20 can be obtained from the service address indicated (see section about warranty).

Replacing a drive belt (see Figs. F + G)

WARNING! DANGER OF INJURY! Before you carry out any work on the device always pull the mains plug out of the mains socket.

Release the screws 5 and remove the belt cover 4 .

Remove the worn drive belt 23 .

First place the new drive belt 23 on to the small belt wheel 25 and then pull the drive belt 23 on to the large belt wheel 24 by rotating it. Put the belt cover 4 back into position and fasten it into place with the screws 5 .

Maintenance and cleaning

WARNING! DANGER OF INJURY! Before you carry out any work on the device al- ways pull the mains plug out of the mains socket.

Always keep the device and the ventilation slots clean. This way you will work more safely and produce better results.

Clean out the planing debris removal port 3 regularly.

Clean out a blocked planing debris removal port using suitable means (e.g. piece of wood, air under pressure, etc.).

Use a dry cloth to clean the housing.

Remove any adhering planing dust with a nar- row paint brush.

In no circumstances use sharp objects, or petrol, solvents or cleaning agents that might attack plastic. Do not allow any liquids to enter the inside of the device.

Service centre

WARNING! Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.

WARNING! If the plug or mains lead needs to be replaced, always have the replacement carried out by the manufacturer or its service centre. This will ensure that your device remains safe to use.

Warranty

This appliance is guaranteed for 3 years from the date of purchase. It has been care- fully produced and meti-culously checked before delivery. Please keep your receipt as proof of purchase. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods can be transmitted free of cost only in this manner. This warranty applies only to the initial purchaser and is non-transferable.

The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. The appliance is intended solely for private, not com- mercial, use.

If this product has been subjected to improper or inappropriate handling, abuse, or interventions not carried out by one of our authorised sales and service outlets, the warranty will be considered void. This warranty does not affect your statutory rights.

GB

DES UK LTD

Tel.: 0871 5000 700 (£ 0,10 / minute)

e-mail: support.uk@kompernass.com

12 GB/IE/CY

Page 12
Image 12
Parkside PEH30 manual Replacing a drive belt see Figs. F + G, Maintenance and cleaning, Service centre Warranty