Parkside PHKS 66 manual Introduction, Circular saw Phks, Proper use, Features and equipment

Introduction

The following pictograms are used in these operating instructions / on the device:

	Read instruction manual!	For indoor use only!
	Observe caution and safety notes!	Risk of loss of life by electric shock from
		damaged mains lead or mains plug!
	Caution – electric shock!	Wear hearing protection, dust
		protection mask, protective glasses
	Danger to life!
		and protective gloves.
V~	Volt (AC)	Caution, laser! Do not expose yourself
		to laser radiation.
n0	Design no-load speed	Proper procedure and handling.
W	Watts (Effective power)	Automatic power delivery system
	Safety class II	Electronic soft start
	Risk of explosion!	Do not dispose of rechargeable batteries
		with your household refuse!
	Keep children away from	Dispose packaging and appliance in
	electrical power tools!	an environmentally-friendly way!

Circular saw PHKS 66

improper use and could give rise to considerable dangers.

Not suitable for commercial use.

Introduction

Please make sure you familiarise your- self fully with the way the device works

before you use it for the first time and that you understand how to handle electrical pow- er tools correctly. To help you do this please read the accompanying operating instructions. Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

Proper use

For sawing longitudinal, cross and mitre cuts in firm- ly supported solid wood, plywood, plastic and lightweight construction materials. Please note that the blade pre-installed in the saw as supplied is in- tended for use with wood only. Any other use or modification to the device shall be considered as

Features and equipment

1Rotation speed setting wheel

2 Safety lock-out

3 ON / OFF switch

4 Spindle lock

5 Cutting depth setting clamp

6 Allen key

7 Automatic blade guard

7a Release lever for the automatic blade guard

8Base plate

9Cutting angle setting clamp

10 Battery compartment cover

11 Laser ON / OFF switch

12 Laser

12a Laser outlet aperture

12b Cutting angle scale

13 Wing screw for guide fence

14 Guide fence slot

6GB/IE