Parkside POE-2400 General safety advice / Preparing for use, Have you understood everything?

General safety advice / Preparing for use

QHave you understood everything?

JOnce you have made yourself familiar with the instructions and advice, the functioning and handling of your device, you are finally in a position to start work. Observing the manufac- turer‘s instructions and advice will maximise your safety while working with the device.

QPreparing for use

Take note of the mains voltage. The mains voltage at the mains socket must match that shown on the rating plate on the device. Devices marked with 230 V can also be operated at 220 V.

mCaution! Make sure that the device is switched off before you connect it to the mains supply.

Note: Always switch on the delta sander before bringing it into contact with the workpiece material.

wood dust in the dust extraction bag (or in the vac- uum‘s dust bag) may ignite, e.g. as a result of flying sparks generated when abrading metals or metal objects left in wood. This can happen particularly if the wood dust is mixed with paint residue or other chemicals and the abraded particles are hot from prolonged abrasion. Therefore you must empty the device’s dust collection box and the vacuum clean- er’s dust bag before taking a break or stopping work and always avoid overheating of the abrad- ed particles and the device.

Wear a dust mask!

Warning! Always pull the mains plug is out of the socket before doing any work on the device.

QAdapterfor external vacuum extraction (with reducer piece)

Switching on the device:

jMove the ON / OFF switch setting “I”.

Switching off the device:

jMove the ON / OFF switch setting “0”.

1

1

forwards into

backwards into

Connection:

j Push the adapter for external vacuum extrac-

tion 7 into the dust extraction spout 4 .

When doing this observe the guide markings

on the device and adapter. Turn the dust

extraction spout to lock in place.

j If it is necessary to use the reducer piece 8 ,

Selecting the oscillation speed:

You can preselect the oscillation speed you require using the oscillation speed setting wheel 2 . You can also change the speed whilst you are working. The way to determine the optimum oscillation speed for your task is to carry out a practical test. Setting 1 = lowest oscillation speed /

Setting max. = highest oscillation speed

QVacuum dust extraction

Warning! Danger of fire! There is the danger of fire when working with electrical devices that have a dust box or can be connected to a vacuum cleaner. Under certain conditions the

10 GB

push the reducer piece into the adapter for

external vacuum extraction 7 .

j Push the hose of a suitable dust extraction de

vice approved for that purpose (e.g. a work-

shop vacuum cleaner) on to the adapter for

external vacuum extraction 7 or the reducer

piece 8 .

Removal:

jPull the hose of the dust extraction device off the adapter for external vacuum extraction 7 .

jPull off the adapter for external vacuum extrac- tion 7 (with the reducer piece 8 if used).