External Surfaces, Internal Engine, Other

STurn idle speed screw counterclockwise to decrease engine speed.

Idle Speed Screw

Air

Filter

Cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer.

WARNING: Prepare unit for storage at end of season or if it will not be used for 30 days or more.

SAllow engine to cool, and secure the unit be-

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric mo-

tors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit

so that any sharp object cannot accidentally cause injury.

SStore unit and fuel well out of the reach of chil- dren.

EXTERNAL SURFACES

SIf your unit is to be stored for a period of time, clean it thoroughly before storage. Store in a

clean dry area.

SLightly oil external metal surfaces.

SRemove spark plug and pour 1 teaspoon of 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter

rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

SCheck entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SStart each season using only fresh fuel hav- ing the proper gasoline to oil ratio.

S Do not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

-- 10 --