5

PURGE TRANSMISSION

To ensure proper operation and performance, it is recom- mended that the transmission be purged before operating tractor for the first time. This procedure will remove any trapped air inside the transmission which may have developed during shipping of your tractor.

IMPORTANT: SHOULD YOUR TRANSMISSION REQUIRE REMOVAL FOR SERVICE OR REPLACEMENT, IT SHOULD BE PURGED AFTER REIN STALLATION BEFORE OPER- ATING THE TRACTOR.

Park tractor on level surface so it will not roll in any direc- tion. Parking brake must be disengaged for the following procedure.

Disengage transmission by placing freewheel control in freewheeling position.

Start engine and move throttle control to slow position. Be sure parking brake is not engaged.

Depress forward drive pedal to full forward position, hold for five (5) seconds and release pedal. Depress reverse drive pedal to full reverse position, hold for five (5) seconds and release pedal. Repeat this procedure three (3) times.

Stop tractor by turning ignition key to "OFF" position.

Engage transmission by placing freewheel control in driving position.

Start engine and move throttle control to slow position.

Drive tractor forward for approximately five feet then back- wardsforfivefeet.Repeatthisdrivingprocedurethreetimes.

Your tractor is now ready for normal operation.

ENTLÜFTEN DES GETRIEBES

Um vorschriftsmäßigen Betrieb und einwandfreie Leistungs- fähigkeit des Getriebes zu gewährleisten, sollte dieses vor der ersten Inbetriebnahme des Traktors entlüftet werden. Auf diese Weise wird sichergestellt, daß sämtliche Luftblasen, die sich während des Transports des Traktors im Getriebe gebildet haben könnten, entfernt werden.

WICHTIG: FALLS DAS GETRIEBE FÜR ETWAIGE WAR- TUNGSARBEITEN ODER ZUM ERSATZ AUSGEBAUT WERDEN MUSS, SOLLTE ES NACH DEM WIEDEREINBAU IM TRAKTOR ENTLÜFTET WERDEN, BEVOR DIESER IN BETRIEB GENOMMEN WIRD.

Den Traktor auf ebenem Boden abstellen und sicherstel- len, daß er nicht ins Rollen kommen kann. Für diesen Vorgang kann die Feststellbremse nicht eingelegt werden.

Das Getriebe auskuppeln, indem die Freilauf-Schaltung auf Freilauf geschaltet wird.

Den Motor anlassen und die Gasbedienung auf langsamen Leerlauf stellen. Sicherstellen, daß die Feststellbremse nicht eingelegt ist.

Das Pedal für den Vorwärtsantrieb in die Position ganz vorwärts drücken, fünf (5) Sekunden lang in dieser Position halten und dann loslassen. Das Pedal für den Rückwärtsantrieb in die Position ganz rückwärts drücken, fünf (5) Sekunden lang in dieser Position halten und dann loslassen. Diesen Schritt drei (3) Mal wiederholen.

Den Traktor abstellen, indem der Zündschlüssel in die “AUS” (OFF) Stellung gedreht wird.

Die Freilauf-Schaltung in die Fahrtstellung rücken, um das Getriebe einzukuppeln.

Den Motor anlassen und die Gasbedienung auf langsa- men Leerlauf stellen.

Den Traktor etwa 1,50 m (5 ft) weit nach vorne fahren und dann um etwa 1,50 m (5 ft) zurücksetzen. Dieses Verfahren dreimal wiederholen.

Der Traktor ist jetzt normal betriebsbereit.

PURGE DE LA TRANSMISSION

Pour assurer un fonctionnement et un rendement corrects, il est recommandé de purger la transmission avant d'utiliser le tracteur pour la première fois. Cette opération supprimera l'air emprisonné à l'intérieur de la transmission pendant le transport du tracteur.

ATTENTION! SI LA TRANSMISSION A ETE DEPOSE POUR SON ENTRETIEN OU SON REMPLACEMENT, ELLE DEVRA ETRE PURGEE APRES SON REMONTAGE ET AVANT REUTILISATION DU TRACTEUR.

Placer le tracteur sur une surface plane afin qu'il ne puisse pas rouler dans aucune direction. Le frein de stationnement doit être desserré pour effectuer les opérations suivantes.

Débrayer la transmission en plaçant la commande de roue libre sur sa position de marche en roue libre (Se référer à la section "TRANSPORT" de ce livret).

Démarrer le moteur et mettre la commande des gaz en position de ralenti. S'assurer que le frein de stationnement n'est pas serré.

Déplacer à fond le levier de commande d'avancement en position de marche avant et le maintenir ainsi pendant 5 secondes. Déplacer ensuite à fond le levier en position de marche arrière et le maintenir ainsi pendant 5 secondes. Répéter ces opérations 3 fois de suite.

Arrêter le moteur du tracteur en amenant la clé de contact sur sa position d'arrêt (OFF).

Embrayer à nouveau la transmission en replaçant la commande de roue libre dans sa position "embrayée" (Voir section "TRANSPORT de ce manuel).

Redémarrer le moteur et placer la commande des gaz en position de ralenti.

Faire avancer le tracteur de 1 à 2 mètres en marche avant, puis de la même distance en marche arière. Répéter cette opération 3 fois de suite.

Le tracteur est maintenant prêt pour une utilisation nor- male.

37

Page 37
Image 37
Partner Tech P145107HP instruction manual Purge Transmission, Entlüften DES Getriebes, Purge DE LA Transmission

P145107HP specifications

The Partner Tech P145107HP is a versatile and robust point-of-sale (POS) terminal designed to enhance transactional efficiency and customer interactions in retail environments, hospitality, and other service sectors. This sophisticated device is equipped with cutting-edge technologies and features that empower businesses to streamline their operations while providing exceptional service.

One of the standout features of the P145107HP is its high-resolution touchscreen display, which offers an intuitive user interface. The 15-inch screen, with its vivid colors and sharp image quality, ensures that employees can easily navigate through applications and access vital information quickly. This user-friendly interface minimizes training time and enhances overall productivity.

In terms of performance, the P145107HP comes with a powerful processor and ample memory, enabling it to handle multiple applications simultaneously without lagging. This ensures that transactions are processed swiftly, reducing wait times for customers and improving the overall shopping experience. Furthermore, the device supports a variety of operating systems, including Windows, Android, and Linux, allowing businesses to choose the platform that best suits their needs.

The P145107HP is designed with connectivity in mind. It comes equipped with multiple USB ports, Ethernet, and optional Wi-Fi capabilities, which facilitate seamless integration with various peripherals such as barcode scanners, receipt printers, and cash drawers. This adaptability ensures that businesses can customize their POS setup to suit their workflow and operational requirements.

Security is a top priority for any POS system, and the Partner Tech P145107HP excels in this area as well. The device features encrypted card readers that comply with industry standards, ensuring that sensitive payment information is protected during transactions. This secure processing builds customer confidence and reduces the risk of data breaches.

Durability is another key characteristic of the P145107HP. Designed for heavy-duty use, the terminal is built to withstand the rigors of everyday transactions in high-traffic environments. The robust construction and reliable performance make it a long-lasting investment for businesses.

In conclusion, the Partner Tech P145107HP is a reliable and highly functional POS terminal that offers an array of features and technologies designed to improve efficiency, enhance customer experiences, and ensure secure transactions. Its high-resolution touchscreen, powerful performance, robust connectivity options, and durability make it an ideal choice for various business applications. Whether in retail or hospitality, the P145107HP stands ready to meet the demands of modern commerce.