ATTACHING THE BAR & CHAIN

(If not already attached)

WARNING: Recheck each assem- bly step if the saw is received assembled. Al- ways wear gloves when handling the chain. The chain is sharp and can cut you even when it is not moving!

1.Loosen and remove the chain brake nuts and the chain brake from the saw.

2.Remove the plastic shipping spacer (if present).

Chain

Brake

Clutch Drum

Chain Brake

Nuts

3.An adjusting pin and screw is used to ad- just the tension of the chain. It is very im- portant when assembling the bar, that the pin located on the adjusting screw aligns into a hole in the bar. Turning the screw will move the adjustment pin up and down the screw. Locate this adjustment before you begin mounting the bar onto the saw. See illustration below.

Inside view of

Chain Brake

Adjustment located on Chain Brake

4.Turn the adjusting screw by hand coun- terclockwise until the adjusting pin just touches the stop. This should allow the pin to be near the correct position.

5.Slide guide bar behind clutch drum until guide bar stops against clutch drum sprocket.

Cutters

Depth Gauge

 

Drive Links

Place chain onto the sprocket

7.Place chain over and behind clutch, fitting the drive links in the clutch drum sprocket.

8.Fit bottom of drive links between the teeth in the sprocket in the nose of the guide bar.

9.Fit chain drive links into bar groove.

10.Pull guide bar forward until chain is snug in guide bar groove. Ensure all drive links are in the bar groove.

11.Now, install chain brake making sure the adjusting pin is positioned in the lower hole in the guide bar. Remember this pin moves the bar forward and backward as the screw is turned.

12.Install chain brake nuts and finger tighten only. Once the chain is tensioned, you will need to tighten chain brake nuts.

CHAIN TENSION (Including units with chain already installed)

NOTE: When adjusting chain tension, make sure the chain brake nuts are finger tight only. Attempting to tension the chain when the chain brake nuts are tight can cause damage.

Checking the tension:

Use the screwdriver end of the chain adjust- ment tool (bar tool) to move the chain around the bar. If the chain does not rotate, it is too tight. If too loose, the chain will sag below the bar.

Mount the Bar

6.Carefully remove the chain from the pack- age. Hold chain with the drive links as shown.

Tip of

Bar

CUTTERS MUST FACE IN

DIIRECTION OF ROTATION

Chain Brake Nuts

Chain Adjustment

Tool (Bar Tool)

Adjusting the tension:

Chain tension is very important. Chain stretches during use. This is especially true during the first few times you use your saw. Always check chain tension each time you use and refuel your saw. You can adjust the chain tension by loosening the chain brake nuts and turning the adjusting screw 1/4 of a turn while lifting up on the bar.

SIf chain is too tight, turn adjusting screw 1/4

turn counterclockwise.

SIf chain is too loose, turn adjusting screw 1/4 turn clockwise.

7

Page 7
Image 7
Partner Tech P351XT, P4-20XT Attaching the BAR & Chain, If not already attached, Drive Links Place chain onto the sprocket

P351XT, P33XT, P4-18XT, P4-20XT specifications

Partner Tech is a prominent name in the world of point-of-sale (POS) equipment, and its lineup of terminals—including the P4-20XT, P33XT, P4-18XT, and P351XT—showcases the company’s commitment to innovation, reliability, and user-friendly design. These models cater to various business needs and environments, making them suitable for retail, hospitality, and various service industries.

The P4-20XT stands out with its sleek 20-inch display, ideal for interactive customer engagement. It features a robust design with an anti-glare screen, ensuring visibility under various lighting conditions. The terminal is equipped with high-performance Intel processors, which facilitate quick transaction processing and multitasking capabilities. With customizable peripherals, such as barcode scanners and payment terminals, the P4-20XT offers flexible connectivity options to streamline operations.

Moving on to the P33XT, this model features a compact design that doesn’t sacrifice performance. The 15-inch LCD touchscreen is suitable for limited counter spaces while still offering vibrant graphics and responsive touch functionality. It integrates various connectivity options, including Wi-Fi and Bluetooth, ensuring seamless communication with other devices. The P33XT is designed with durability in mind, featuring a fanless cooling system and rugged construction that can withstand the rigors of busy environments.

The P4-18XT provides a balance of performance and size, featuring an 18-inch display that is versatile for various operational needs. It supports multiple peripherals and has an ergonomic design that enhances user interaction. This terminal is equipped with advanced security features, including encryption support, which ensures safe processing of customer transactions.

Finally, the P351XT is a powerhouse designed for high-demand environments. Its larger touchscreen interface provides ample space for various applications, while the powerful processor ensures quick data processing. The P351XT’s scalability is a key advantage, allowing businesses to customize the system with various modules and attachments that suit their specific requirements. Additionally, it provides advanced reporting and analytics tools, helping businesses make informed decisions based on real-time data.

In conclusion, the Partner Tech P4 series, including the P4-20XT, P33XT, P4-18XT, and P351XT, showcases the company's dedication to enhancing the retail experience through advanced technology, robust design, and exceptional user functionality. These terminals are reliable, adaptable, and equipped with the latest features to meet the challenges of modern business environments.