XA200 Owner’s Manual

charged. The “Power” LED should not be on. If the “Power” LED is on, don’t get excited, just use the front panel stand-by button to go to stand-by mode, with the “Standby” LED on and the “Power “ LED off.

OK, so the amplifier is sitting there in stand-by mode with just the single blue LED lit. No speaker connected yet. You can go ahead and con- nect the source and speakers. Make sure you are in standby mode to protect your speakers from transients. The prudent installer will unplug the XA200’s power cord from the mains while attaching speaker cables.

To avoid the possibility of short circuits always connect speaker cables to the speakers prior to connecting to the amplifier. The output bind- ing posts will accept either bare wire or spades. (Regulatory agencies in many countries have banned binding posts that will accept a banana plug, forcing us to abandon this option.) Make sure that your speaker wires only attach to the outputs of the amplifier, not to each other and never to the amplifier case.

Some powered subwoofers require an audio signal ground reference and their makers may suggest that a black speaker terminal is where this volt- age reference might be found. On complementary designs, which would be typical of all power amps produced by Pass Laboratories™, this is an incorrect and unsafe assumption. On all Pass Laboratories™ power amplifiers a reference of 0 volts will be found only at pin 1 of the XLR input or at the shell of the RCA input.

Reference connections for these devices require special consideration when used with our product. If you have such a device, and wish to use it with our product, please contact our Foresthill, California factory for specific instructions.... you have been warned.

The amplifier may be driven single-end or balanced, your choice. Single- ended input will always occur through the RCA connector and balanced input will always occur through the XLR connector. If driving the am- plifier single-ended leave the supplied jumper in place between pins 1 & 3 on the input XLR. On the XLR connectors pin 1 is ground, pin two is positive input and pin 3 is inverted (negative) input. Pin numbers are marked on the XLR. If you re-install the jumper incorrectly or leave it lying about, the amplifier will not work properly. You must choose either XLR or RCA inputs it is not advised to try and run both concur- rently.

XLR input connector showing proper placement of jumper pin for use with single-ended (RCA) input.

5

Page 4 Page 6
Page 5
Image 5
Pass Labs XA200 owner manual
Page 4 Page 6

XA200 specifications

The Pass Labs XA200 is a distinguished power amplifier that is acclaimed for its exceptional performance and remarkable build quality. Designed for audiophiles who demand the highest fidelity in their audio systems, the XA200 offers a unique blend of power, clarity, and musicality that sets it apart from the competition.

At the heart of the XA200 is a Class A topology, renowned for its ability to deliver pure and uncolored sound. This design ensures that the amplifier operates in its most linear region, providing a smooth and accurate response across the frequency spectrum. With an impressive output of 200 watts per channel into 8 ohms, and effectively doubling that power into 4 ohms, the XA200 is capable of driving even the most demanding loudspeakers with ease.

One of the standout features of the XA200 is its innovative use of the Pass Labs’ patented Feedforward error correction technology. This groundbreaking approach reduces distortion to extremely low levels, enabling the XA200 to produce a highly detailed and transparent soundstage. Additionally, the amplifier employs a combination of high-quality components, including custom-designed power supply transformers and large reservoir capacitors, to ensure stable operation under various load conditions.

The build quality of the XA200 is also noteworthy. Encased in a robust chassis with a striking aesthetic, this amplifier not only looks elegant but is designed to minimize vibration and resonance. The dual mono configuration of the XA200 ensures that each channel operates independently, further enhancing the overall sound quality and separation of instruments.

In terms of connectivity, the XA200 is equipped with balanced XLR inputs and single-ended RCA inputs, allowing for versatile integration into different audio setups. It also features a switching power supply that enhances its efficiency, ensuring that the amplifier remains cool even during extended listening sessions.

Overall, the Pass Labs XA200 is a testament to the brand’s commitment to excellence in high-end audio. Its combination of power, advanced technologies, and impeccable build quality makes it an ideal choice for audiophiles seeking a rich and immersive listening experience. Whether used in a dedicated home theater or a refined stereo system, the XA200 stands ready to reveal the true potential of any musical recording.
Top Page Image Contents